Pratik gereçler

Logitech Keycap STL Models for 3D Printing

This collection gathers STL files for keycaps and small keyboard parts made for Logitech boards, including full replacement sets, single modifier keys and shaped novelty caps. It is useful when one cap is worn, missing or you want a different look on a keyboard you already own. Most files are meant for desktop 3D printing in plastic, with the stem geometry being the part that decides whether the cap sits on the switch. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 2392 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2392 model
Kategori hakkında

«Logitech Keycap STL Models for 3D Printing»

The models split into a few groups. Some cover a whole row or a whole set for a particular keyboard family, others replace one key such as shift, ctrl or a blank cap, and a third group is decorative, with animal shapes, symbols or themed tops. There are also pullers, feet and base plates that belong to the same repair and modding routine rather than to typing itself.

Before printing, read the author's page for the switch type the stem was drawn for, the key profile and the height of the cap, since these differ between low-profile and taller boards. Check how many parts a file contains, whether the model needs supports, and which material and settings the author lists. Photos of real prints are the quickest way to judge how the top surface and the stem come out on a home 3D printer.

If the results look thin, try other wordings: key cap, keyboard cap, replacement key, low-profile cap, or the switch family name instead of the keyboard name. Related searches such as keycap puller, keyboard foot, base plate or novelty keycap often lead to files that fit the same project. Combining a switch term with a key name, for example a modifier plus a switch type, narrows the list quickly.

FAQ

Sıkça sorulan sorular

What decides whether a printed keycap sits on the switch?
The stem inside the cap. It is drawn for a particular switch family, so compare the stem shape and dimensions on the author's page with the switch on your keyboard before printing.
Can I print a single key instead of a whole set?
Yes. Many files cover one key, such as a modifier or a blank cap, which is practical when only one cap is damaged or you want to test the fit first.
Which material is used for keycaps?
Authors usually list their own choice and settings. Rigid filaments are common for the body, while the top surface and the stem are the areas where layer height and orientation matter most.
Do keycaps need supports?
It depends on the shape. Flat and low-profile caps often print without them, while shaped or hollowed designs may need supports inside the stem or under overhangs.
İlgili
Pratik gereçler

3D Models of Custom Keycaps and Fidget Clickers

14026 model
Pratik gereçler

Anti-Stress Keycap 3D Models and STL Files

8934 model
Pratik gereçler

Logitech M190 3D Models and STL Files

1780 model
Pratik gereçler

Logitech G703 3D Models: Mods, Repairs and Mounts

2234 model
Pratik gereçler

3D Models of Keyboard Keycaps: STL Files to Browse

23595 model
Pratik gereçler

Laptop Keycap 3D Models and STL Files

3078 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç