Mutfak

3D Models of Coffee Drippers and Pour-Over Stands

This collection gathers STL files for coffee drippers and the parts that go with them: cones, stands, adapters and drip trays. It helps if you want to build a pour-over setup on a 3D printer or replace one worn piece of an existing one. Most of these models are small and print in a few hours. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 2768 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2768 model
Kategori hakkında

«3D Models of Coffee Drippers and Pour-Over Stands»

Cone-shaped drippers with ribs and a single outlet form the largest group, and they differ mainly in cone angle, diameter and rib pattern. Stands hold a dripper above a mug or carafe and range from a plain ring to multi-part frames. Adapters connect a dripper to a bottle or a narrow cup, while trays and racks catch drips or hold wet parts after rinsing.

Before printing, read the author's page: overall dimensions, the diameter of the cone opening, the number of parts and how they join, and whether supports are needed. The material and settings listed there matter, since these parts sit close to hot water. Photos of real prints show how ribs, threads and fits came out on another machine.

Search results widen quickly if you try other terms: pour-over, filter holder, cone, dripper stand, adapter, drip tray, drying rack. Related topics such as coffee accessories, kitchen gadgets and pottery molds often contain parts that fit the same setup. If a model is close but not exact, check the comments and remixes on its page before scaling it yourself.

FAQ

Sıkça sorulan sorular

What is a coffee dripper model used for?
It is a printed cone or holder that guides water through a paper filter into a cup or carafe. The same topic also covers stands, adapters and trays that support or catch drips from that setup.
Which dimensions matter when choosing a dripper STL?
The diameter of the cone opening, the cone angle, the height and the size of the cup or carafe it rests on. Compare those figures with the filter size and the vessel you already have.
Do printed drippers need supports?
It depends on the geometry. Flat cones and simple stands often print without them, while hollow ribs, overhangs and thin handles may need them. The author's page usually states what was used.
Can a printed dripper take standard paper filters?
Filters come in numbered sizes, so check the filter size and cone angle the author lists for the model. A printed cone made for one size will not hold a filter of another size well.
İlgili
Mutfak

Coffee 3D Models and STL Files for Printing

101683 model
Mutfak

Coffee Organizer 3D Models and STL Files

222688 model
Mutfak

Coffee Machine 3D Models and STL Files

254102 model
Mutfak

Coffee Container STL Models for Beans and Filters

94163 model
Mutfak

Coffee Cup 3D Models: STL Files for Printing

105067 model
Mutfak

Coffee Jar 3D Models: Lids, Adapters and Holders

45829 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç