Elektronik

3D printing enclosures for Doppler sensor boards

This collection gathers STL files for cases that hold small electronic boards, including Doppler sensor modules. You can compare how different authors solve the same problem: board size, connector placement and lid design. The files are made for 3D printing on a home 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2487 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2487 model
Kategori hakkında

«3D printing enclosures for Doppler sensor boards»

Most entries fall into a few groups: housings for controller and display boards, cases for car key and key fob boards, enclosures for power, welding and audio boards, and small shells for radio modules and sensor boards. They differ mainly in how the board is fixed inside — screw bosses, clips or a simple slot — and in whether the lid is separate or printed as one piece. Some designs leave the display and connectors open, while others cover the whole board and rely on cutouts.

Before printing, open the author's model page and check the stated board dimensions and the number of parts. Look at whether supports are needed, which material and layer height the author lists, and how the board is held: screw holes, clips or a friction fit. Photos of real prints show how the walls, ports and lid gaps came out, which matters more than the render.

If the exact board is not in the results, search by synonyms: enclosure, housing, case, box, shell, or the board's function rather than its name. Related topics such as sensor modules, radar boards, display panels and key fobs often lead to a case that can be scaled or edited. Adding the board dimensions or connector type to the query narrows the list further.

FAQ

Sıkça sorulan sorular

What should I measure before printing an enclosure for a Doppler board?
Measure the board outline, the height of the tallest component and the position of connectors and mounting holes. These numbers decide whether the case closes and whether the ports line up.
Do these enclosures need supports?
It depends on the design. Many are split into a base and a lid so they print without supports, while single-piece shells with overhangs may need them. The author's page usually states this.
Can I change the size of the case in the slicer?
Scaling also changes wall thickness and screw holes, so a small adjustment can break the fit. Editing the source file is more predictable when you need a different board size.
Which material works for a small electronics case?
PLA is common for indoor cases, while PETG or ABS are often chosen where more heat or impact is expected. Check what the author lists and what your printer handles.
İlgili
Elektronik

3D models for Doppler sensor housings and mounts

1889 model
Elektronik

3D Models for Circuit Board Enclosures and STL Cases

211397 model
Elektronik

3D Models for SSD Board Enclosures and Mounts

180901 model
Elektronik

Board Holder STL Models for 3D Printing

603005 model
Elektronik

SSD and Memory Card Holders: 3D Models to Print

69257 model
Elektronik

3D Printing Motherboard Mounts, Covers and Rack Panels

1281 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç