Uzay ve havacılık

3D Models for Telescope Main Mirror Mounts

This collection gathers 3D models related to mounting the main mirror in a telescope. You will find mirror cells, kinematic holders, spider assemblies, and structural parts for Newtonian and Dobsonian builds. The files are intended for 3D printing and can help you replace or adapt a mirror mount. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 6714 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 6714 model
Kategori hakkında

«3D Models for Telescope Main Mirror Mounts»

Mirror mounts range from simple brackets that hold the mirror in place to kinematic holders that allow fine tilt adjustment. Spider assemblies support the secondary mirror and affect the optical path, while truss tube and Dobsonian structures include the main mirror cell as part of a larger frame. Some models focus on a single part, such as a mounting plate, while others are complete telescope assemblies.

Before printing, check the model page for the mirror diameter and thickness the mount is designed for, as well as the number of parts and whether assembly is required. Look at the author's recommended material and settings, since a mirror cell needs to be rigid and dimensionally stable. Photos of real prints can show how the part fits and whether supports were used.

To find more options, try synonyms like mirror cell, mirror holder, primary mirror mount, or kinematic mirror mount. Related topics include spider vanes, secondary mirror holders, telescope truss tubes, and Dobsonian mirror boxes. You can also search for specific telescope types, such as Newtonian or Dobsonian, to narrow the results.

FAQ

Sıkça sorulan sorular

What is a kinematic mirror mount?
A kinematic mount uses adjustment screws to tilt the mirror in two axes, which helps with collimation. It typically consists of a fixed plate and a moving plate connected by springs or screws.
How do I choose the right mirror cell for my telescope?
Check the mirror diameter and thickness that the cell is designed for. Also consider the number of support points and whether the cell allows for collimation.
Can I print a mirror mount in PLA?
PLA can work for low-stress parts, but it may creep under load over time. Many builders prefer PETG or ABS for better dimensional stability, though the author's page often lists a recommended material.
What is the difference between a spider assembly and a mirror cell?
A spider assembly holds the secondary mirror in a Newtonian telescope, while a mirror cell supports the primary mirror at the back of the tube. Both are critical for optical alignment.
İlgili
Ev ve yaşam

Teleskop ana ayna tutucusu için 3D model ve STL

261305 model
Ev ve yaşam

3D baskı için ayna modelleri ve STL dosyaları

53908 model
Ev ve yaşam

3D model ayna tutucu ve STL dosyaları

545294 model
Uzay ve havacılık

Tank 1990 Temalı 3D Model ve STL Koleksiyonu

3290 model
Uzay ve havacılık

Ceres 3D model ve STL dosyaları

1422 model
Uzay ve havacılık

Sputnik 1 ve uydu 3D modelleri, STL dosyaları

236790 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç