Hobi ve kendin yap

3D Models for FPV Landing Skids and Drone Feet

This collection gathers STL files for landing skids, feet and pads used on FPV quadcopters, camera drones and RC aircraft. Most entries are small add-on parts that lift a frame off the ground or protect the underside during a landing. It helps if you already know your frame size and how the part is meant to attach. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 3595 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 3595 model
Kategori hakkında

«3D Models for FPV Landing Skids and Drone Feet»

The files fall into a few groups. There are feet and skids for camera drones, snap-on pieces for FPV quadcopters, flat pads that a drone lands on, and longer skid sets for helicopters and fixed-wing trainers. Some are simple legs, while others extend the existing gear or add a shape meant to be grabbed by hand.

When choosing, read the model page rather than the picture alone. Check the stated size and scale against your frame, the number of parts and how they join, and whether the author lists supports, material and print settings. Photos of real prints show how the part sits on the frame and how much ground clearance it adds.

To narrow the search, try the words used for the same part: landing gear, landing feet, skid, foot pad, gear extender. Adding your frame class, such as a small camera drone or a five-inch quadcopter, cuts the list further. Related topics like propeller guards, camera mounts and frame spares often appear alongside these parts.

FAQ

Sıkça sorulan sorular

What is the difference between landing skids and landing gear?
The words are often used for the same thing: parts that hold a drone off the ground. Skids usually describe simple legs or rails, while landing gear can include taller or wider assemblies.
How do I know a skid will fit my drone?
Compare the dimensions and mounting style on the model page with your frame. Attachment can be screws, clips, or a snap fit, and each needs a different amount of space.
Do these parts need supports when printed?
It depends on the shape. Flat pads and simple legs often print without them, while angled or overhanging sections may need supports. The author usually notes this on the model page.
Which material is used for landing parts?
Authors often list the material and settings they used. Flexible filaments absorb impact, while stiffer ones hold shape better; the choice depends on how the part attaches and how hard it lands.
İlgili
Hobi ve kendin yap

RC Skid Plates: 3D Printing STL Models for Chassis

8416 model
Taşıtlar

3D Printing Skid Plates: STL Models for RC and Gear

9085 model
Hobi ve kendin yap

MJX Skid Plate 3D Models for RC Vehicles

4139 model
Hobi ve kendin yap

3D Models of Skid Plates for RC Vehicles

3707 model
Hobi ve kendin yap

FPV Holder 3D Models: Goggles, Batteries, Mounts

5525 model
Hobi ve kendin yap

FPV Mark 4 drone STL mounts and TPU parts

167868 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç