Alet ve ekipman

3D Models for TBS Mounts and FPV Accessories

This collection gathers STL files for mounts used on TBS-style FPV frames and wings. It covers GPS and antenna brackets, action camera holders, video transmitter mounts, and wall hangers. Use it to find a starting point for a 3D printer project and then compare the geometry with your own airframe. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 5910 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5910 model
Kategori hakkında

«3D Models for TBS Mounts and FPV Accessories»

The mounts in this collection fall into a few practical groups. GPS and antenna brackets hold small modules and often include a mast or arm for positioning. Action camera mounts may add a filter holder or a specific angle, while video transmitter and receiver mounts focus on stacking or strap points. Wall hangers serve storage rather than flight.

When choosing a model, check the dimensions and scale against the part you plan to install. Look at the number of separate pieces, how they join, and whether the author notes supports. The material and print settings listed on the model page matter because thin brackets and camera plates behave differently in different filaments. Photos of real prints help you judge clearances and mounting holes.

To narrow the search, try synonyms and related terms such as FPV mount, antenna bracket, camera holder, GPS pod, VTX bracket, or wall hanger. Combine them with frame family names or part types you already use. If a result is close but not exact, look at remixes and variations that change hole spacing, angle, or arm length.

FAQ

Sıkça sorulan sorular

What types of TBS mounts appear in this collection?
Common groups include GPS and antenna brackets, action camera holders, video transmitter and receiver mounts, and wall hangers for FPV airframes. Each group solves a different placement or storage task.
How do I choose the right mount for my frame?
Measure the module or camera you want to attach and compare its footprint with the model dimensions. Check the mounting pattern, angle, and whether the part needs supports. The author's photos and notes usually show how the part sits on the frame.
Can I adapt a mount designed for one frame to another?
Sometimes the hole spacing or arm length can be adjusted, but the geometry may not line up directly. Look for remixes or editable files, and verify the fit with a test print before using the final part.
What should I check before printing a camera or GPS mount?
Review the model's size, wall thickness, and the material the author lists. Consider how the part will be fastened and whether the camera or module needs clearance around buttons or cables. A small test piece can reveal whether holes and slots match your hardware.
İlgili
Alet ve ekipman

TBS Front Mount 3D Models: Antennas, GPS, Electronics

503151 model
Ev ve yaşam

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108 model
Alet ve ekipman

FPV Mount 3D Models: Camera, Antenna, GPS

525876 model
Alet ve ekipman

Battery Mounts: 3D Models for Tool and E-Bike Packs

469510 model
Alet ve ekipman

Front Mount 3D Models: Printer, RC and Wall STL Files

19024 model
Alet ve ekipman

Clamp Mount 3D Models: STL Files for Desks and Pipes

13351 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç