工具与设备

3D Models for TBS Mounts and FPV Accessories

This collection gathers STL files for mounts used on TBS-style FPV frames and wings. It covers GPS and antenna brackets, action camera holders, video transmitter mounts, and wall hangers. Use it to find a starting point for a 3D printer project and then compare the geometry with your own airframe. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月14日

查看合集 查看全部5910个模型 →
合集

从这里开始

合集中的全部模型

查看全部5910个模型
关于此分类

«3D Models for TBS Mounts and FPV Accessories»

The mounts in this collection fall into a few practical groups. GPS and antenna brackets hold small modules and often include a mast or arm for positioning. Action camera mounts may add a filter holder or a specific angle, while video transmitter and receiver mounts focus on stacking or strap points. Wall hangers serve storage rather than flight.

When choosing a model, check the dimensions and scale against the part you plan to install. Look at the number of separate pieces, how they join, and whether the author notes supports. The material and print settings listed on the model page matter because thin brackets and camera plates behave differently in different filaments. Photos of real prints help you judge clearances and mounting holes.

To narrow the search, try synonyms and related terms such as FPV mount, antenna bracket, camera holder, GPS pod, VTX bracket, or wall hanger. Combine them with frame family names or part types you already use. If a result is close but not exact, look at remixes and variations that change hole spacing, angle, or arm length.

FAQ

常见问题

What types of TBS mounts appear in this collection?
Common groups include GPS and antenna brackets, action camera holders, video transmitter and receiver mounts, and wall hangers for FPV airframes. Each group solves a different placement or storage task.
How do I choose the right mount for my frame?
Measure the module or camera you want to attach and compare its footprint with the model dimensions. Check the mounting pattern, angle, and whether the part needs supports. The author's photos and notes usually show how the part sits on the frame.
Can I adapt a mount designed for one frame to another?
Sometimes the hole spacing or arm length can be adjusted, but the geometry may not line up directly. Look for remixes or editable files, and verify the fit with a test print before using the final part.
What should I check before printing a camera or GPS mount?
Review the model's size, wall thickness, and the material the author lists. Consider how the part will be fastened and whether the camera or module needs clearance around buttons or cables. A small test piece can reveal whether holes and slots match your hardware.
相关
工具与设备

TBS Front Mount 3D Models: Antennas, GPS, Electronics

503151个模型
家居日用

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108个模型
工具与设备

FPV Mount 3D Models: Camera, Antenna, GPS

525876个模型
工具与设备

Battery Mounts: 3D Models for Tool and E-Bike Packs

469510个模型
工具与设备

Front Mount 3D Models: Printer, RC and Wall STL Files

19024个模型
工具与设备

Clamp Mount 3D Models: STL Files for Desks and Pipes

13351个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录