Alet ve ekipman

Camera Washer and Mount 3D Models

This collection gathers STL files related to camera washers and camera mounting hardware. You will find washer nozzles, fluid connectors, wall mounts, and brackets for different camera setups. It helps you locate parts for 3D printing when a stock mount or washer is missing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 2519 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2519 model
Kategori hakkında

«Camera Washer and Mount 3D Models»

The models range from small washer nozzles and hose connectors to larger wall mounts, shelves, and printer brackets. Some are single-piece parts that clip or bolt on, while others use several components and fasteners. Automotive washer parts often follow a specific body or bumper shape, whereas security-camera mounts tend to use standard screw spacing.

When choosing a model, check the dimensions and scale against your camera or washer assembly. Look at the number of parts, the assembly steps, and whether the author notes support requirements. Also review the material and print settings listed on the model page, and look for photos of actual prints to judge surface finish and dimensions.

To refine your search, try terms such as camera washer nozzle, lens washer, glass washer connector, security camera mount, and camera bracket. Related searches include action camera holder, gimbal mount, and CCTV bracket. Adding your camera shape or mounting point type can narrow the results.

FAQ

Sıkça sorulan sorular

What is a camera washer used for?
It directs washer fluid onto a camera lens or housing, often on a vehicle, to clear dust and water. The 3D-printed parts in this collection are usually nozzles, connectors, or brackets that hold the washer in place.
What should be measured before printing a camera mount?
Measure the camera body, the screw or clip points, and the distance to the mounting surface. Compare those dimensions with the model's stated size and scale.
Do camera washer parts need supports?
It depends on the model's overhangs and orientation. Check the author's page for notes on supports, layer height, and material.
Can these models work with different camera shapes?
Mounting points vary between camera models and housings. Search by the shape of the camera or the type of bracket you need, then check the dimensions on the model page.
İlgili
Pratik gereçler

3D Models for 360 Camera Mounts and Holders

5315 model
Yazıcı parçaları

STL Files for Camera Mounts on 3D Printers

14085 model
Alet ve ekipman

PTZ Camera Mounts: 3D Models and STL Files

43542 model
Pratik gereçler

Camera Mounts for 3D Printing: STL Files to Browse

243381 model
Alet ve ekipman

Washer and Grip STL Models for 3D Printing

2256 model
Elektronik

3D Models for Camera Housings and Cases

5730 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç