Hobi ve kendin yap

Picatinny Rail STL Files for 3D Printing

This collection gathers STL files for Picatinny rail sections, covers, risers and mounts for accessories like flashlights and cameras. If you are working on a 3D printing project that involves standard 20 mm rails or adapters for other systems, these models offer a starting point for customization and assembly. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 09.10.2026

Koleksiyonu gör Tümünü göster: 17614 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 17614 model
Kategori hakkında

«Picatinny Rail STL Files for 3D Printing»

You will find basic rail segments in various slot counts alongside NATO-style and parametric rails that can be resized in CAD. Covers, risers and adapter sets such as M-LOK-to-Picatinny versions appear as well, plus mounts for foregrips, optics and flashlights. Some designs are dedicated to specific firearm patterns, while others are generic 20 mm rails meant for universal use.

Before printing, check the author’s page for exact dimensions and scale, the number of parts and whether assembly hardware is required. Look at photos of real prints to judge surface finish and tolerance, and note the material and settings the designer recommends. Some rails need support structures during printing because of overhanging slots or clamp interfaces.

If you need a different format, try searching for Weaver rail, RIS or NATO rail, since many dimensions overlap. You can also filter by mount type, slot length or accessory category such as flashlight holder, camera mount or angled foregrip to narrow results.

FAQ

Sıkça sorulan sorular

What is the difference between Picatinny and Weaver rail models?
Picatinny rails have standardized slot spacing and width, while Weaver rails use a similar 20 mm base but with narrower, non-standard slots. Many 3D-printed mounts are labeled for both, so compare the slot dimensions on the author’s page before printing.
Do printed Picatinny rails need hardware for installation?
Some designs are press-fit or clamp-on, while others require screws, nuts or threaded inserts. Check the model description for a hardware list and assembly instructions.
Can I resize a parametric Picatinny rail to fit my setup?
Parametric models are built in OpenSCAD or similar CAD tools where you can adjust length, slot count or hole spacing. Open the source file and modify the parameters to match your specific measurements.
What are M-LOK Picatinny rail adapters used for?
They let you attach standard Picatinny accessories to handguards or forends that use the M-LOK slot system. The adapter section typically bolts into an M-LOK slot and presents a short Picatinny rail on the outer surface.
İlgili
Hobi ve kendin yap

Picatinny Rail Sights: 3D Models and STL Files

7074 model
Alet ve ekipman

Picatinny Rail 3D Models for PKM Mounts

12567 model
Alet ve ekipman

Picatinny 45-Degree Mounts: 3D Models and STL Files

227050 model
Alet ve ekipman

Picatinny Rail Handle 3D Models and STL Files

72397 model
Hobi ve kendin yap

3D Models of Gear Boxes and Reducers

189576 model
Hobi ve kendin yap

Apex 5 Protection Parts as 3D Printing STL Files

4105 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç