爱好与创客

Picatinny Rail STL Files for 3D Printing

This collection gathers STL files for Picatinny rail sections, covers, risers and mounts for accessories like flashlights and cameras. If you are working on a 3D printing project that involves standard 20 mm rails or adapters for other systems, these models offer a starting point for customization and assembly. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自6个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月9日

查看合集 查看全部17614个模型 →
合集

从这里开始

合集中的全部模型

查看全部17614个模型
关于此分类

«Picatinny Rail STL Files for 3D Printing»

You will find basic rail segments in various slot counts alongside NATO-style and parametric rails that can be resized in CAD. Covers, risers and adapter sets such as M-LOK-to-Picatinny versions appear as well, plus mounts for foregrips, optics and flashlights. Some designs are dedicated to specific firearm patterns, while others are generic 20 mm rails meant for universal use.

Before printing, check the author’s page for exact dimensions and scale, the number of parts and whether assembly hardware is required. Look at photos of real prints to judge surface finish and tolerance, and note the material and settings the designer recommends. Some rails need support structures during printing because of overhanging slots or clamp interfaces.

If you need a different format, try searching for Weaver rail, RIS or NATO rail, since many dimensions overlap. You can also filter by mount type, slot length or accessory category such as flashlight holder, camera mount or angled foregrip to narrow results.

FAQ

常见问题

What is the difference between Picatinny and Weaver rail models?
Picatinny rails have standardized slot spacing and width, while Weaver rails use a similar 20 mm base but with narrower, non-standard slots. Many 3D-printed mounts are labeled for both, so compare the slot dimensions on the author’s page before printing.
Do printed Picatinny rails need hardware for installation?
Some designs are press-fit or clamp-on, while others require screws, nuts or threaded inserts. Check the model description for a hardware list and assembly instructions.
Can I resize a parametric Picatinny rail to fit my setup?
Parametric models are built in OpenSCAD or similar CAD tools where you can adjust length, slot count or hole spacing. Open the source file and modify the parameters to match your specific measurements.
What are M-LOK Picatinny rail adapters used for?
They let you attach standard Picatinny accessories to handguards or forends that use the M-LOK slot system. The adapter section typically bolts into an M-LOK slot and presents a short Picatinny rail on the outer surface.
相关
爱好与创客

Picatinny Rail Sights: 3D Models and STL Files

7074个模型
工具与设备

Picatinny Rail 3D Models for PKM Mounts

12567个模型
工具与设备

Picatinny 45-Degree Mounts: 3D Models and STL Files

227050个模型
工具与设备

Picatinny Rail Handle 3D Models and STL Files

72397个模型
爱好与创客

3D Models of Gear Boxes and Reducers

189576个模型
爱好与创客

Apex 5 Protection Parts as 3D Printing STL Files

4105个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录