Ofis ve çalışma masası

USB Flash Drive Stands: 3D Models and STL Files

This collection brings together STL files for USB flash drive stands: desk holders for several drives, wall shelves, keychain connectors and cases for a single drive. It is useful when drives keep sliding around a desk and you want a fixed place for them. Most of these shapes are simple, so they work well as an early 3D printing project. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 481065 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 481065 model
Kategori hakkında

«USB Flash Drive Stands: 3D Models and STL Files»

The models differ mainly in how many drives they take and where they sit. Multi-slot desk stands hold a row of drives upright or at an angle, wall versions use a shelf or a bracket, and keychain connectors carry one drive with your keys. There are also combined designs where a phone or laptop dock includes a slot or two for a flash drive or an SD card.

Before printing, open the author's page and check the slot dimensions against the actual body of your drive, since USB sticks vary in width and thickness. Look at how many parts the model has, whether it needs glue or screws, and whether the author lists supports, material and settings. Photos of real prints show how the slots fit and how stable the base looks.

If the results are thin, try other wordings: holder, rack, organizer, dock, shelf, caddy, or the connector type such as USB-C. Related searches like SD card holder, cable organizer or desk organizer often lead to the same kind of model. You can also search by the drive shape, for example a slim or a swivel-body stick.

FAQ

Sıkça sorulan sorular

How do I pick a stand that fits my flash drive?
Measure the width, thickness and length of the drive body, then compare those numbers with the slot dimensions on the model page. A slot slightly wider than the drive is easier to use than one matched exactly.
Do these stands need supports?
It depends on the shape. Flat-based holders with vertical slots often print without them, while overhangs and wall brackets may need them. The author's page usually states what the model was printed with.
Which material works for a desk holder?
PLA is common for indoor stands because it holds its shape well at room temperature. PETG is often chosen when the part is thin or flexes, such as a clip or a keychain connector.
Can one stand hold drives of different sizes?
Yes, some designs use wide slots or angled rests that accept several body shapes. Check the listed slot count and spacing, and remember that very thin drives may sit loosely in a wide slot.
İlgili
Ofis ve çalışma masası

3D Model: Flash Bellek Organizeri ve Tutucu Modelleri

26192 model
Ofis ve çalışma masası

3D Yazıcı için USB Flash Bellek Organizeri

205921 model
Ev ve yaşam

3D Models for Stands and Display Holders

10887 model
Ev ve yaşam

3D yazıcı için stand ve raf modelleri (STL)

1177204 model
Ofis ve çalışma masası

3D model kalemlik ve masa düzenleyici

639095 model
Ofis ve çalışma masası

3D Kağıt Standı Modelleri ve STL Dosyaları

523074 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç