办公与桌面

USB Flash Drive Stands: 3D Models and STL Files

This collection brings together STL files for USB flash drive stands: desk holders for several drives, wall shelves, keychain connectors and cases for a single drive. It is useful when drives keep sliding around a desk and you want a fixed place for them. Most of these shapes are simple, so they work well as an early 3D printing project. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自6个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部548198个模型 →
合集

从这里开始

合集中的全部模型

查看全部548198个模型
关于此分类

«USB Flash Drive Stands: 3D Models and STL Files»

The models differ mainly in how many drives they take and where they sit. Multi-slot desk stands hold a row of drives upright or at an angle, wall versions use a shelf or a bracket, and keychain connectors carry one drive with your keys. There are also combined designs where a phone or laptop dock includes a slot or two for a flash drive or an SD card.

Before printing, open the author's page and check the slot dimensions against the actual body of your drive, since USB sticks vary in width and thickness. Look at how many parts the model has, whether it needs glue or screws, and whether the author lists supports, material and settings. Photos of real prints show how the slots fit and how stable the base looks.

If the results are thin, try other wordings: holder, rack, organizer, dock, shelf, caddy, or the connector type such as USB-C. Related searches like SD card holder, cable organizer or desk organizer often lead to the same kind of model. You can also search by the drive shape, for example a slim or a swivel-body stick.

FAQ

常见问题

How do I pick a stand that fits my flash drive?
Measure the width, thickness and length of the drive body, then compare those numbers with the slot dimensions on the model page. A slot slightly wider than the drive is easier to use than one matched exactly.
Do these stands need supports?
It depends on the shape. Flat-based holders with vertical slots often print without them, while overhangs and wall brackets may need them. The author's page usually states what the model was printed with.
Which material works for a desk holder?
PLA is common for indoor stands because it holds its shape well at room temperature. PETG is often chosen when the part is thin or flexes, such as a clip or a keychain connector.
Can one stand hold drives of different sizes?
Yes, some designs use wide slots or angled rests that accept several body shapes. Check the listed slot count and spacing, and remember that very thin drives may sit loosely in a wide slot.
相关
办公与桌面

3D打印U盘收纳架模型与STL文件

26814个模型
办公与桌面

U盘收纳盒3D打印模型

205921个模型
家居日用

3D打印支架模型合集

10887个模型
家居日用

3D打印支架合集：手机、线材与收纳架

1222814个模型
办公与桌面

3D打印笔筒模型合集

681788个模型
办公与桌面

3D打印纸张支架模型

530424个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录