Ev ve yaşam

3D Models for Corrugated Conduit Splitters and Clamps

This collection gathers STL files for corrugated conduit splitters, multi-way connectors, and retaining clips. It covers fittings for routing flexible pipe in workshops, gardens, and home projects. Use it to compare part counts, assembly methods, and the author's listed print settings before you start. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 2294 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2294 model
Kategori hakkında

«3D Models for Corrugated Conduit Splitters and Clamps»

The models range from simple Y-splitters and tees to four-way connectors and pipe-to-pipe clips. Some are designed as single-piece parts, while others use separate clamps, spacers, or locking tabs. Outdoor versions often include covers or drainage features, and parametric designs let you adjust angles or diameters.

On the author's model page, check the nominal diameter, wall thickness, and whether the splitter matches the corrugation profile. Look at the number of parts, how they join, and whether supports are needed for overhangs. The material and settings the author lists, plus photos of real prints, help you judge how the part will fit and hold.

To narrow the results, try synonyms such as conduit, tube, hose, and flexible pipe, along with terms like tee, Y-splitter, manifold, and adapter. Related searches include retaining clips, pipe clamps, spacers, and drainpipe separators. Combining a fitting type with a nominal size or a use case, such as workshop or garden, can surface more relevant models.

FAQ

Sıkça sorulan sorular

What is a corrugated conduit splitter used for?
It divides one corrugated pipe run into two or more paths, often for routing cables, hoses, or drainage. The splitter may be a single printed part or a set with clamps.
How do I choose the right size for a corrugated pipe connector?
Measure the outer diameter and the corrugation pitch, then compare them with the dimensions on the model page. Check whether the connector is meant to fit over the pipe or inside it.
Do these models need supports?
It depends on the shape and orientation. Many splitters print without supports, but overhanging branches or locking tabs may need them. The author's notes and photos can show how the part was oriented.
Can I adapt a splitter for a different pipe diameter?
Some files are parametric and allow you to change the diameter or angle. For fixed models, you can scale the part, but scaling also changes wall thickness and fit. Check the model page for editable versions.
İlgili
Alet ve ekipman

Gofra boru 32 mm için 3D model ayırıcı ve kelepçe

2374 model
Ev ve yaşam

Intex havuz boru fiksatörü için 3D model

93996 model
Alet ve ekipman

Gofre boru için 3D model ayırıcı ve klipsler

12327 model
Ev ve yaşam

Ön kapı için evcil hayvan kapısı 3D model

12359 model
Ev ve yaşam

Kanepe 3D Model ve STL Dosyaları

25478 model
Ev ve yaşam

Plastik ranza yatak için 3D model ve STL dosyaları

9102 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç