Pratik gereçler

TYT Radio Accessories and 3D Models

This collection gathers STL files for accessories built around TYT handheld and mobile radios. You will find printable organizers, protectors and mounting hardware that help arrange a shack or secure a radio during use. Treat each design as a starting point to adapt for your specific radio and 3D printer setup. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 09.10.2026

Koleksiyonu gör Tümünü göster: 1481 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1481 model
Kategori hakkında

«TYT Radio Accessories and 3D Models»

Several styles of accessories for TYT radios appear across the results. Desk stands and feet hold a unit upright on a workbench, while holsters and belt holders keep a handheld secure during transport. Knob guards and covers shield controls from accidental bumps, and faceplate mounts attach a detached head unit to a vehicle dash or wall plate.

Before starting a print, open the author’s page and check the dimensions against your exact radio model and the scale of the STL. Look at how many parts need assembly, whether the author mentions support structures, and which filament and layer height they used. Photos of real prints help you judge fit and finish more clearly than renders alone.

If the first results are too narrow, try broader terms such as ham radio accessories, amateur radio mount or handheld radio holder. You can also search for related radios that share the same form factor, since accessories for one model often fit comparable units from the same series.

FAQ

Sıkça sorulan sorular

Will these accessories fit my specific TYT radio?
Check the author’s description for the exact model name and measurements, then compare them to your radio. Many designs are specific to one size, so scaling the STL may be needed if the dimensions differ.
Do I need supports to print radio stands and guards?
It depends on the geometry. Look at the author’s notes and preview images for overhangs; some upright stands and thin guards need supports, while simple flat plates may not.
Can I modify a holster or mount to fit a different radio?
Most STL files can be scaled or edited in mesh software. Verify the clearances and mounting hole spacing on your radio before reprinting.
What filament do authors list for radio accessories?
Many listings mention PLA, PETG or ABS. Check the photos and notes for layer height and infill, then match those settings to your own filament.
İlgili
Elektronik

STL Models for TYT Radios: Stands, Mounts, Cases

12142 model
Elektronik

TYT MD-UV390 radio accessories 3D models

461 model
Elektronik

TYT 690 radio accessories: 3D models and STL

801 model
Pratik gereçler

TYT 390 Protection: 3D Models and STL Files

1787 model
Pratik gereçler

PTT and Knob Guards for TYT Radios: 3D Models

34758 model
Pratik gereçler

TYT UV 390 3D Models: Guards, Holders, Covers

3016 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç