Elektronik

TYT MD-UV390 radio accessories 3D models

This collection gathers accessories for the TYT MD-UV390 and MD-390 ham radios, including stands, holders, knob guards and port covers. If you own one of these radios, you can use a 3D printer to replace lost parts or add protective gear. Check each STL page for measurements, support requirements and photos from other builders. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 09.10.2026

Koleksiyonu gör Tümünü göster: 461 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 461 model
Kategori hakkında

«TYT MD-UV390 radio accessories 3D models»

Most models fall into a few groups: desktop stands that hold the radio upright, holsters and holders for belts or panels, guards that shield knobs and buttons from bumps, and small covers that block dust in the speaker-mic port. Stands and holders are usually larger prints that need more space on the build plate, while guards and covers are smaller, often quick prints that attach with friction or adhesive.

Before starting a print, look at the author's page for exact dimensions and scale, because some accessories are sized for specific battery packs or cases. Check whether the design needs supports or multiple parts, and read any notes about recommended materials such as PETG for impact resistance or TPU for flexible holders. Photos of real prints help confirm the geometry matches current radio revisions.

If you do not see what you need, try broader terms such as ham radio stand, HT holder, or two-way radio accessory. You can also search for related TYT models or universal amateur radio accessories that may adapt to your radio with minor scaling.

FAQ

Sıkça sorulan sorular

Will these accessories work with the MD-UV390 GPS version?
Some designs are modeled for the standard or GPS variant, so compare the author's dimensions and photos to your radio's features before printing.
What is the difference between the MD-390 and MD-UV390 accessories?
The two radios share a similar body but differ in branding and firmware regions, so a stand or holder often works for both, while precise covers may be specific to one model.
Can I adapt a universal phone holder to mount this radio?
Several models include adapters that let you attach the radio to standard phone mounts or GoPro-style studs; check the part list for any required hardware.
Do knob guards need special print settings?
Many are small, flat prints that work in standard PLA or PETG, though the author may suggest thicker walls or specific infill for impact resistance.
İlgili
Pratik gereçler

3D-модели защиты для рации TYT TH-390

1787 model
Pratik gereçler

3D-модели для рации TYT UV-390

3016 model
Elektronik

Крепления TYT-390 для авто - STL-модели для 3D-принтера

338105 model
Elektronik

3D-модели фиксаторов для аккумуляторов

2229 model
Pratik gereçler

3D-модели для раций и гаджетов TYT и Retevis

1481 model
Pratik gereçler

3D-модели для радиостанций TYT MD-UV390 и похожих

4126 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç