Elektronik

PCB Mounting Angles: 3D Models and STL Files

This collection gathers 3D models for mounting printed circuit boards at an angle, including clips, brackets, feet, and adjustable holders. It helps when you need to position a board inside an enclosure, on a rail, or on a work surface before 3D printing the part. Check the model page for the exact geometry and hardware the author lists. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 485194 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 485194 model
Kategori hakkında

«PCB Mounting Angles: 3D Models and STL Files»

The collection includes several families: DIN rail clips, L-shaped feet, angle adapters, soldering clamps, and board-specific mounts. Some are simple brackets that hold a board at a fixed angle, while others are adjustable or customizable for different board sizes. Clips and feet tend to be small parts, whereas clamps and holders may include moving pieces or a base.

When choosing a model, look at the board dimensions, hole spacing, and the angle the bracket provides. Review how many parts need to be printed, whether assembly uses screws or inserts, and if the author notes supports or particular material settings. Photos of real prints can show clearances and how the board sits in the holder.

To refine the search, try terms such as PCB bracket, board holder, DIN rail clip, angle mount, and soldering clamp. Related searches include breadboard mount, prototyping board support, and enclosure standoff. Adding the board type or the mounting direction can narrow results further.

FAQ

Sıkça sorulan sorular

What is a PCB mounting angle used for?
It holds a printed circuit board at a set angle or position, often inside an enclosure, on a rail, or on a work surface. The shape can be a simple L-bracket, a clip, or an adjustable holder.
How do I choose the right bracket for my board?
Compare the board outline and mounting hole pattern with the model dimensions. Also review the angle, the number of printed parts, and any hardware the author lists.
Can these models be adjusted for different board sizes?
Some are parametric or customizable, while others are fixed-size brackets. The model page usually states whether scaling or editing is possible.
What should I check before printing a PCB holder?
Review the recommended orientation, layer height, and material notes from the author. Look at photos of finished prints to judge clearances and how the board fits.
İlgili
Genel arama

3D Yazıcı İçin 3D Modeller ve STL Dosyaları

1809298 model
Elektronik

3D model kart tutucu STL dosyaları

603005 model
Elektronik

Devre kartı kutusu 3D model ve STL dosyaları

225426 model
Ev ve yaşam

Köşe için 3D model ve STL dosyaları

120339 model
Elektronik

SSD ve SD Kart Tutucu 3D Model

69257 model
Elektronik

Anakart için 3D model ve STL dosyaları

1281 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç