Nesneler

Umbrella 3D Models: Mounts, Hooks and Anchors

This collection gathers 3D models built around umbrellas: holders for cars, anchors for sand, wall and table hooks, plus printed handles and decorative pieces. Most of them are small functional parts, so a single spool is usually enough for a first 3D printing attempt. It is also a useful starting point if you want to adapt an existing design to your own umbrella diameter or mounting point. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 6336 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 6336 model
Kategori hakkında

«Umbrella 3D Models: Mounts, Hooks and Anchors»

The reference splits roughly into two groups. Functional parts dominate: mounts that clip into a car interior, sand screws and anchors that keep a beach umbrella upright, hanging hooks, key organizers and small fidget pieces. Decorative and fandom items form the second group, where an umbrella appears as a logo, a silhouette or an accessory on a character figure. The two groups differ in what matters most — mechanical fit in the first case, surface finish and color in the second.

When choosing a model, open the author's page and read the listed dimensions before anything else: shaft diameter, tube thickness, thread pitch on sand screws and the spacing of mounting holes decide whether a part will work at all. Check how many separate pieces the design has and whether they are meant to be glued, screwed or snapped together, and whether the author calls for supports. For outdoor use, look at the material the author recommends and at photos of real prints, since thin walls and layer orientation along a bending load are common weak points.

To widen the results, try synonyms and related wording: parasol, brolly, canopy, rain cover, shaft, pole, bracket, clip, wall mount, cup holder. Searching by the object you want to attach the umbrella to often works better than searching by the umbrella itself — a car model, a stroller, a table edge or a fence rail. Related topics such as hooks, organizers, sand anchors and figurine accessories also bring up parts that fit the same job.

FAQ

Sıkça sorulan sorular

What should I measure before printing an umbrella holder?
Measure the umbrella shaft or handle diameter, the thickness of the surface it will attach to, and the clearance around the mounting point. Compare those numbers with the dimensions listed on the model page, since a few millimeters decide whether the part grips or rattles.
Which material works for a part that stays outdoors?
Authors usually name a material and settings on the model page. For sun and rain exposure, many designs call for a filament with better UV and moisture resistance than standard PLA, and thicker walls at the load-bearing points.
Do printed umbrella models need supports?
It depends on the geometry. Hooks, brackets and anchors often print without them if the model is oriented well, while overhanging threads and curved canopies may need them. The author's notes and print photos show the intended orientation.
Can I scale a model to fit a different umbrella?
Scaling changes wall thickness and thread fit along with the outer size, so a part scaled far from the original may no longer hold. Small adjustments are usually safer, and editing the source file is an option when the author provides one.
İlgili
Nesneler

Umbrella Cap and Tip STL Models for 3D Printing

11452 model
Nesneler

Tent Magnet 3D Models and STL Files

3238 model
Nesneler

Dog Helmet 3D Models and STL Files for Cosplay

89528 model
Nesneler

Piston 3D Models: STL Engines, Fidgets, Trophies

7496 model
Nesneler

Diamond and Rhombus 3D Models for Printing

11038 model
Nesneler

Karelian 3D Models: Emblems, Household Items, STL

1244 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç