Elektronik

XT60 and USB-C 3D Printing Models to Browse

This collection gathers 3D models built around XT60 and USB-C power connections, from dust caps and plug housings to cable holders and panel mounts. Most of the files are small parts intended for 3D printing in TPU or a rigid filament, so a 3D printer handles them in a short session. Browse it when you need a connector cover, a mount or a clamp for a build of your own. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 73089 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 73089 model
Kategori hakkında

«XT60 and USB-C 3D Printing Models to Browse»

The models fall into a few groups. Connector caps and dust covers sit over XT60 plugs when they are unplugged, while plug housings and panel mounts change how a connector sits in a chassis. Cable holders, clamps and ties deal with routing, and the flexible TPU versions bend where rigid ones do not.

On the author's model page, check the connector size and gender the part is drawn for, since XT60 and USB-C footprints differ between devices. Look at the number of parts, whether the piece prints in one go or needs assembly, and whether the author lists supports, layer height or material. Photos of real prints show how the fit and surface turned out.

To widen or narrow the results, try synonyms and related terms: XT60 cap, XT60 dust cover, XT30, USB-C panel mount, cable clamp, TPU cable tie, battery holder, power supply adapter. Adding the device or printer name you are working with often brings up parts drawn for that exact layout.

FAQ

Sıkça sorulan sorular

What is an XT60 cap used for?
It fits over the connector when it is not plugged in. Most designs are a simple push-on shell printed in a flexible filament.
Do these parts need TPU, or does PLA work?
Both appear in the reference: rigid housings and panel mounts are usually drawn for PLA or PETG, while caps and ties that have to flex are shown in TPU. The author's page states the material the model was designed around.
How do I find a holder for a specific connector or board?
Search the connector name together with holder, mount or case, and add the board or device it belongs to. Related searches such as TP4056 holder or USB port bracket can lead to parts with the same mounting pattern.
What should I check before printing a panel mount?
Check the cutout dimensions, the screw or clip method, and the wall thickness around the connector opening. A quick test print of the mounting area helps confirm the fit before the full part is printed.
İlgili
Elektronik

XT60 and USB-C Adapters: 3D Models and STL Files

66260 model
Elektronik

XT60 Charger Adapter 3D Models and STL Files

82859 model
Elektronik

3D Models for XT60 and Rear Drone Mounts

2698 model
Elektronik

Wire Connection Blocks: 3D Models and STL Files

58554 model
Elektronik

Antenna Control Panel 3D Models and STL Files

5711 model
Elektronik

GPU Holder 3D Models and STL Files for PC Builds

615293 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç