Elektronik

3D Models for XT60 and Rear Drone Mounts

The collection covers XT60 connector holders, antenna mounts, rear brackets for FPV frames, and a few 3D printer accessory mounts. It is useful when you need a small STL part to route power or antennas on a drone build. You can also find battery holders and frame-specific rear mounts. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 2698 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2698 model
Kategori hakkında

«3D Models for XT60 and Rear Drone Mounts»

The XT60 holders vary by how the connector is retained, whether the part is a simple bracket or a full rear mount, and how the wires exit. Antenna mounts often share the same rear section and may include space for a connector or an antenna tube. Printer-side holders in the reference are a separate group: spool holders, cable guides, and toolhead mounts that follow a different mounting logic.

Before printing, check the model page for the stated dimensions, screw hole spacing, and the number of separate parts. Look at whether the author shows supports, print orientation, material, and photos of a finished print. For drone parts, check the frame size and the connector type listed by the author.

To narrow the search, combine the connector name with the part role, such as XT60 holder, rear mount, antenna bracket, or battery tray. Related terms include power connector mount, drone rear bracket, and FPV frame accessory. If you are looking for printer parts, use terms like spool holder, cable guide, or toolhead mount instead.

FAQ

Sıkça sorulan sorular

What is an XT60 rear holder used for on an FPV frame?
It holds the XT60 power connector at the rear of the frame and keeps the battery lead routed away from the props. The exact shape depends on the frame and the connector orientation.
How do I choose between an antenna mount and a combined rear mount?
A separate antenna mount only carries the antenna, while a combined rear mount may also hold the XT60 connector or a video transmitter. Check the part list and mounting points on the model page.
What should I check before printing a drone mount?
Review the dimensions, screw spacing, and any listed material or layer height. Look for photos of the printed part and notes about supports or orientation.
Can I adapt a holder designed for one frame to another?
You can scale or modify the STL if the mounting pattern allows it, but the connector cutout and screw holes may need changes. Start from the dimensions on the author's page.
İlgili
Elektronik

GEPRC Mark4 3D Printing Parts and STL Files

3037 model
Elektronik

Mark 4 3D Models: Drone Frames, Props and Parts

378051 model
Elektronik

FPV Drone Antenna Mount 3D Models and STL Brackets

2736 model
Elektronik

XT60 and USB-C 3D Printing Models to Browse

73089 model
Elektronik

XT60 and USB-C Adapters: 3D Models and STL Files

66260 model
Elektronik

FPV Mark4 V2 3D Models: Mounts, Plates and TPU Parts

3343 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç