Yazıcı parçaları

20x40 End Caps: STL Models for Profile Extrusion

This collection gathers STL files for caps and plugs that close the open ends of aluminium and steel profiles, most often 20x40 and neighbouring cross-sections. Alongside plain end caps you will find open-side versions, corner connectors and round tube plugs. It is useful when you are finishing a frame or a rail with a 3D printer and want the cut ends covered. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 8 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 254106 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 254106 model
Kategori hakkında

«20x40 End Caps: STL Models for Profile Extrusion»

The largest group covers caps for V-slot and T-slot extrusions, with 20x40 and 20x20 as the most common cross-sections and 40x40 appearing often as well. Some are simple covers that press into the slot, while others are open-sided or shaped so the slot stays usable for later additions. A separate group is structural rather than decorative: corner brackets and L-connectors that join two profiles instead of closing one. Round plugs for tubes and pipes form another group, usually sized by outer diameter rather than by slot.

When choosing a model, note the cross-section the author states and how the cap is held in place: friction in the slot, a screw through the profile, or a lip that wraps the outside. Check the wall thickness and whether the file is a single part or needs assembly. On the author's model page, read the material and slicer settings listed there and look at photos of real prints to judge how the edges and the slot opening come out.

Search terms differ by region and by profile system, so try synonyms: end cap, endkappe, plug, tappo, cover, and profile names such as V-slot, T-slot or extrusion. Adding the cross-section as digits, for example 2040 or 40x40, narrows the results quickly. Related searches that often lead to useful files include corner connector, profile bracket, rail cap and profile box.

FAQ

Sıkça sorulan sorular

What does 20x40 mean in these models?
It is the cross-section of the profile in millimetres, 20 mm by 40 mm. Caps are drawn to that outer size, and the slot type, V-slot or T-slot, changes the shape of the lip.
How do I work out which cap size I need?
Measure the outer width and height of your profile and note the slot width. Authors usually state both on the model page, so compare those figures with your measurement before printing.
Do these caps need supports?
It depends on the shape. Flat caps often print without them, while caps with a deep recess or an overhanging lip may need them. The author's page usually shows the orientation used.
Can I scale a cap to another profile size?
Scaling changes the slot lip together with the outer size, so a scaled cap may no longer hold. It is usually better to find a file drawn for that cross-section.
İlgili
Aydınlatma

3D Models for LED Profile End Caps 20x40

284792 model
Alet ve ekipman

20x40 Shaped End Caps: 3D Models and STL Files

12474 model
Pratik gereçler

Phone Plug and Wall Mount 3D Models

4213 model
Taşıtlar

Headlight Plug STL Models for 3D Printing

48665 model
Taşıtlar

Tow Bar Plugs and Hitch Covers: 3D Models to Print

69360 model
Ev ve yaşam

Pipe Plug STL Models for 3D Printing

64457 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç