电子产品

Arduino Mega 3D Models: Cases, Mounts and STL Files

This collection gathers 3D models made around the Arduino Mega board: enclosures, mounting brackets, rail mounts, holders and a few combined kits. Most of them exist because a bare board is awkward to fix inside a project, and a printed part solves that with a couple of hours on a 3D printer. The files are grouped by what they do rather than by author, so you can compare shapes before downloading an STL. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自5个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月12日

查看合集 查看全部3626个模型 →
合集

从这里开始

合集中的全部模型

查看全部3626个模型
关于此分类

«Arduino Mega 3D Models: Cases, Mounts and STL Files»

The parts fall into a few recognizable groups. Enclosures wrap the board in a closed or partly open box, often with cutouts for USB and power connectors. Brackets and rail mounts leave the board exposed and only fix it to a surface or a profile. Holders and trays support a breadboard or a prototyping board next to the controller, while combined kits bundle room for shields, drivers or a display.

When you pick a model, start with the board revision it was drawn around, because connector positions and hole spacing differ between versions. Then look at how the part is meant to be fastened: screw bosses, clips, rails or standoffs, and whether the author shows the hardware used. Check the wall thickness and the openings for cables, whether the geometry needs supports, and what material and settings the author lists. Photos of real prints on the model page tell you more than a render.

If the results feel narrow, try other words for the same object: housing, box, tray, cradle, bracket, rail mount, panel plate. Related searches help too, such as shield stacks, display cutouts, prototyping boards, driver modules or general electronics enclosures. Adding a board revision or a mounting standard to the query usually narrows the list faster than scrolling.

FAQ

常见问题

How do I know a model fits my board revision?
Check the notes on the model page: many parts are drawn around one revision, and hole positions or connector cutouts can shift between them. If the revision is not stated, compare the outline in the photos with your own board.
Do these parts need support material?
It depends on how the model is oriented. Flat bases and open frames usually print without supports, while overhanging clips and closed tops may need them. The author's page often states the intended orientation.
Which material is used for enclosures like these?
Common choices are rigid filaments for boxes and slightly more flexible ones for clips. The model page usually lists the material and settings the author used, which is a better starting point than guessing.
Can I scale a case up or down?
Scaling changes hole diameters, clearances and clip tension, so a scaled part may no longer fit the board or the screws. Looking for a variant drawn for your board size is usually the safer route.
相关
电子产品

Arduino 3D Models: Boards, Cases and Robot Parts

32225个模型
电子产品

Arduino Mega and RAMPS 3D Printing Enclosures

24901个模型
电子产品

Arduino Uno 3D Models: Cases, Mounts, Shields

20037个模型
电子产品

Arduino TFT Display 3D Models and STL Parts

17515个模型
电子产品

Arduino Leonardo and Uno Case 3D Models to Print

123764个模型
电子产品

Arduino Uno Cases and Mounts: 3D Models to Print

19513个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录