电子产品

3D Models for BTC Mining Boards and 12V Enclosures

This collection gathers 3D printing files built around BTC mining motherboards and the 12 V hardware that surrounds them: IO shields, DIN rail brackets, small enclosures and compact cases. It is useful when a board has to be mounted, cooled or boxed rather than left loose on a desk. Most items are small enough to print on a standard 3D printer in one or two sessions. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 40个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月14日

查看合集 查看全部1477个模型 →
合集

从这里开始

合集中的全部模型

查看全部1477个模型
关于此分类

«3D Models for BTC Mining Boards and 12V Enclosures»

The models fall into a few groups that differ mainly in how they attach. IO shields and brackets are flat panels shaped around the board's rear connectors and screw holes. DIN rail mounts and fan supports are printed as clips or frames that hold a control board and a 120 mm fan. Enclosures for 12 V UPS units and thermostats are closed boxes with cutouts for cables, while Mini-ITX and ATX cases are larger builds that may need several printed sections joined together.

Before printing, compare the author's dimensions with your own hardware. Check the board revision, the position of the rear ports, the spacing of the mounting holes and the rail profile a DIN clip is drawn for. Look at whether the model needs supports, how thick the walls are, and which material and settings the author lists, since parts sitting near warm components are often printed in something other than PLA. Photos of finished prints show how the screw bosses and thin clips came out.

Search results improve when you vary the wording. Try terms such as mining rig, TB250, IO shield, DIN rail, 120 mm fan duct, mini UPS, SFF or rack mount instead of repeating one phrase. Related topics include ASIC cooling ducts, NAS cases, open-frame cases and thermostat housings, which often share the same mounting and airflow ideas. Narrowing by part type, board size or fan diameter usually removes unrelated results faster than adding more words.

FAQ

常见问题

What is usually included in a mining board IO shield file?
Most files contain a single panel shaped around the rear connectors, sometimes with a separate bracket or screw bosses. Check the listed board revision and port layout before printing.
Which material works for brackets near warm components?
PLA is common for parts that stay cool, while brackets close to heat sources are often printed in PETG or ABS. The author's page usually states the material and settings used.
How do I check that a DIN rail mount matches my board?
Measure the mounting hole spacing on your board and compare it with the dimensions in the model description. Also confirm the rail profile, since clips are drawn for a specific rail shape.
What should I look at in photos of printed parts?
Look at how the clips, screw bosses and thin walls turned out, and whether the part warped or needed supports. These details say more about a file than the render alone.
相关
电子产品

3D models for 6.5-inch speaker grills and rings

131107个模型
电子产品

Wind Direction Sensor 3D Models and STL Files

3620个模型
电子产品

TYT 390 Car Mounts: 3D Models and STL Files

338105个模型
电子产品

Electronic Load Tester 3D Printing Models and Cases

15285个模型
电子产品

Cyberdeck STL Files: Modular 3D Printing Projects

615个模型
电子产品

FPV Drone Legs and Landing Gear STL Models

2805个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录