电子产品

WS2812B Holders and Mounts: 3D Models to Print

This collection gathers printable holders, clips and mounts made for WS2812B LED strips, single pixels and small boards. Most files fall into a few groups: strip clips, mounts for aluminium profiles, pixel holders and housings that turn the LEDs into a lamp or a shape. It is useful when you are planning a 3D printing project around addressable lighting and need a mount that matches the hardware you already have. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月15日

查看合集 查看全部2660个模型 →
合集

从这里开始

合集中的全部模型

查看全部2660个模型
关于此分类

«WS2812B Holders and Mounts: 3D Models to Print»

Strip clips usually hold a length of flexible tape and keep it flat against a surface, while mounts for aluminium profiles are shaped around a slot and position the strip along an edge. Single-pixel holders take one board and give it a screw hole or a snap fit, and decorative housings combine a holder with a diffuser, a grid or a lamp body. Some files mix a holder with an unrelated object, such as a stand or a garden stake, so the LED becomes part of a larger item.

Before printing, check the strip width and pixel pitch the file was drawn for, since holders are made for specific tape widths and the LED spacing affects how the strip sits. Look at the mounting side: screw holes, slot profile, cable exit and the clearance left for wires and connectors. The author's page often lists the material, layer height and whether supports are needed, and photos of real prints show how the part fits in practice.

If a search returns little, try other names for the same hardware, such as addressable LED, Neopixel or RGB pixel, and add the word clip, bracket or mount. Related searches include LED diffuser, light housing, cable channel and lamp shade, because these parts are often published under the finished object rather than the LED type. Adding the profile size, the strip width or the intended use to the query narrows the results further.

FAQ

常见问题

How do I know which strip width a holder fits?
The model page usually states the tape width and the LED spacing it was drawn for. Measure your strip and the pitch between LEDs, then compare those numbers with the description and the dimensions in the file.
Do these holders need supports when printed?
It depends on the shape. Clips with open channels and flat mounts often print without them, while closed housings and overhanging brackets may need support. Check the orientation the author recommends and the notes on the model page.
Which material works for a part that sits next to LEDs?
Many people print these parts in PLA or PETG, but LEDs produce some heat, so the choice depends on how hard they are driven and how enclosed the holder is. The author's page may list a material and settings used for a test print.
Can I mount a strip along a 2020 aluminium profile?
Yes, there are mounts shaped to fit the slot of that profile and hold the strip on one face. Check the profile size, the direction the LEDs should face and how the wires leave the part before printing.
相关
电子产品

WS2812B 3D Models: Lamps, Matrices and STL Parts

5449个模型
物品

3D Models of Holders: STL Files for Desk and Home

1468953个模型
电子产品

3D models for cable holders and wire organizers

15724个模型
电子产品

3D Models for Wire Holders: STL Files for Soldering

544710个模型
电子产品

Board Holder STL Models for 3D Printing

14837个模型
电子产品

3D Printed Antenna Holder STL Models for FPV and RC

531423个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录