電子工作

WS2812B Holders and Mounts: 3D Models to Print

This collection gathers printable holders, clips and mounts made for WS2812B LED strips, single pixels and small boards. Most files fall into a few groups: strip clips, mounts for aluminium profiles, pixel holders and housings that turn the LEDs into a lamp or a shape. It is useful when you are planning a 3D printing project around addressable lighting and need a mount that matches the hardware you already have. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月15日

コレクションを見る モデル2660件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル2660件をすべて表示
カテゴリについて

«WS2812B Holders and Mounts: 3D Models to Print»

Strip clips usually hold a length of flexible tape and keep it flat against a surface, while mounts for aluminium profiles are shaped around a slot and position the strip along an edge. Single-pixel holders take one board and give it a screw hole or a snap fit, and decorative housings combine a holder with a diffuser, a grid or a lamp body. Some files mix a holder with an unrelated object, such as a stand or a garden stake, so the LED becomes part of a larger item.

Before printing, check the strip width and pixel pitch the file was drawn for, since holders are made for specific tape widths and the LED spacing affects how the strip sits. Look at the mounting side: screw holes, slot profile, cable exit and the clearance left for wires and connectors. The author's page often lists the material, layer height and whether supports are needed, and photos of real prints show how the part fits in practice.

If a search returns little, try other names for the same hardware, such as addressable LED, Neopixel or RGB pixel, and add the word clip, bracket or mount. Related searches include LED diffuser, light housing, cable channel and lamp shade, because these parts are often published under the finished object rather than the LED type. Adding the profile size, the strip width or the intended use to the query narrows the results further.

FAQ

よくある質問

How do I know which strip width a holder fits?
The model page usually states the tape width and the LED spacing it was drawn for. Measure your strip and the pitch between LEDs, then compare those numbers with the description and the dimensions in the file.
Do these holders need supports when printed?
It depends on the shape. Clips with open channels and flat mounts often print without them, while closed housings and overhanging brackets may need support. Check the orientation the author recommends and the notes on the model page.
Which material works for a part that sits next to LEDs?
Many people print these parts in PLA or PETG, but LEDs produce some heat, so the choice depends on how hard they are driven and how enclosed the holder is. The author's page may list a material and settings used for a test print.
Can I mount a strip along a 2020 aluminium profile?
Yes, there are mounts shaped to fit the slot of that profile and hold the strip on one face. Check the profile size, the direction the LEDs should face and how the wires leave the part before printing.
関連
電子工作

WS2812B 3D Models: Lamps, Matrices and STL Parts

モデル5449件
オブジェクト

3D Models of Holders: STL Files for Desk and Home

モデル1468953件
電子工作

3D models for cable holders and wire organizers

モデル15724件
電子工作

3D Models for Wire Holders: STL Files for Soldering

モデル544710件
電子工作

Board Holder STL Models for 3D Printing

モデル14837件
電子工作

3D Printed Antenna Holder STL Models for FPV and RC

モデル531423件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く