物品

Speaker Grills and Mesh Panels: STL Models for 3D Printing

This collection gathers 3D models of speaker grills, protective mesh and honeycomb panels made for 3D printing. It covers round grills named by driver size, oval covers for car speakers, and flat hex mesh that can be scaled or trimmed. Use it when a driver needs a cover and no stock part fits the opening you have. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自7个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部26389个模型 →
合集

从这里开始

合集中的全部模型

查看全部26389个模型
关于此分类

«Speaker Grills and Mesh Panels: STL Models for 3D Printing»

The models differ mainly by opening shape and by how the mesh is built. Round grills are usually labelled by nominal driver size in inches or millimetres, oval covers follow the 6x9 car speaker format, and honeycomb panels are flat sheets of hex cells that you cut or scale yourself. Some files combine a woofer opening with a separate hole or mount for a tweeter, while smaller grills serve fans, vents and cabinet cutouts.

On the author's model page, check the outer diameter, the mounting hole spacing and the thickness of the ribs, since those decide whether the part sits flush on your baffle. Look at whether the file is one piece or split into sections, whether the hex pattern needs supports at the chosen orientation, and which material and settings the author lists. Photos of real prints show how the mesh reads at a distance and how much of the driver stays visible.

To narrow the results, search by synonyms such as speaker grille, protective mesh, hex panel or cover, and add the measurement you need in millimetres or inches. Naming the driver type helps as well: woofer, tweeter, subwoofer or studio monitor. Related terms like fan grill, vent panel and honeycomb sheet bring up panels that follow the same geometry even when the title does not mention a speaker.

FAQ

常见问题

How do I choose the right grill size for my speaker?
Measure the cutout and the mounting holes on your baffle, then compare them with the outer diameter and hole spacing the author lists. Drivers are often named by nominal size, so a 165 mm and a 6.5 inch label can point to the same opening.
Do honeycomb speaker grills need supports?
It depends on the rib geometry and how the part is oriented on the bed. Flat panels often print without them, while deeper cones or recessed rims may need support under overhangs; the author's print notes and photos usually show the intended orientation.
Can I scale a grill model to fit my opening?
Small changes in scale are common, but they also change wall thickness, rib width and hole size. A large rescale can leave the mesh too thin or the mounting holes in the wrong place, so check the dimensions before printing.
Which material is used for printed speaker grills?
Authors typically list PLA or PETG in their print settings, and the choice usually follows the look you want and how much heat sits near the driver. Read the notes on the model page rather than assuming one material fits every build.
相关
音乐

3D models of speaker grilles and STL grids

22260个模型
音乐

3D Printed Speaker Grills and Woofer Guards: STL Files

75710个模型
电子产品

Speaker Grill 3D Models and STL Files

17492个模型
音乐

8-Inch Speaker Grill STL Models for 3D Printing

53853个模型
物品

Speaker Grille and Enclosure STL Models

1226个模型
角色

Minion Figures, Fan Grilles and Speaker STL Models

1909个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录