打印机配件

Ultimaker 2 Hotend Upgrades: 3D Models and STL Files

This collection gathers STL files for adapting and maintaining the hotend area of an Ultimaker 2. You will find mounts for alternative hotends, fan adapters, extruder conversions, and small replacement parts. It helps when you are changing the toolhead or refreshing an older 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 47个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部8192个模型 →
合集

从这里开始

合集中的全部模型

查看全部8192个模型
关于此分类

«Ultimaker 2 Hotend Upgrades: 3D Models and STL Files»

Hotend mounts vary by the hotend they accept, the mounting pattern, and whether they keep the original gantry or require a new carriage. Fan adapters often change the shroud size or duct angle, while extruder conversions move the drive system and may alter the filament path. Replacement knobs, clips, and gauge holders are smaller accessories that solve specific handling or adjustment tasks.

Before printing, check the model page for the listed dimensions, part count, and assembly steps, because a mount that attaches to one carriage may not attach to another. Look at whether the author calls for supports, which material they used, and how the fan duct clears the nozzle and sensor. Photos of real prints can show tolerances and how the parts go together after installation.

If you need a different hotend, try search terms such as toolhead mount, fan duct, or extruder carriage, and combine them with the printer name. Related searches include bowden tube guides, bed leveling brackets, and enclosure parts, since these often appear alongside hotend changes. You can also look for the hotend model or the fan size to narrow results.

FAQ

常见问题

What is the difference between a hotend mount and a fan adapter?
A hotend mount holds the hotend and attaches it to the carriage, while a fan adapter guides cooling air to the nozzle or heat break. Some designs combine both functions, so read the part list to see what is included.
Do I need to change the extruder when swapping the hotend?
Not always. Some mounts keep the original extruder and only change the hotend position, while direct-drive conversions replace the extruder and filament path. The model page should list the required parts and any changes to the bowden tube.
What should I check before printing a hotend mount?
Check the dimensions, mounting holes, and clearance around the fan, sensor, and nozzle. Also review the material and settings the author lists, and look at photos of finished prints to judge how the parts go together.
Can I use the original fan with a new hotend?
It depends on the fan size and the duct design. Many adapters are made for a specific fan size, so measure your fan and compare it with the dimensions on the model page.
相关
打印机配件

Ultimaker 2 E3D V6 Hotend Mounts: 3D Printing STL Files

3036个模型
打印机配件

Ultimaker 2 Series 3D Printing Parts and Accessories

12778个模型
打印机配件

Ender 3 Hotend STL Models: Covers, Ducts, Mounts

12743个模型
打印机配件

Ultimaker 2 Extruder STL Models: Mounts and Upgrades

11521个模型
打印机配件

Prusa Hotend 3D Models: Mounts, Toolheads, STL Files

3772个模型
打印机配件

Ultimaker 2 Hotend Upgrades: 3D Printing STL Files

1714个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录