Elektronik

Pixhawk Mount STL Files for 3D Printing

This collection covers STL files for Pixhawk mounts, including anti-vibration plates, GPS holders, cases and frame brackets. It is useful when you need to adapt an autopilot to an existing airframe or replace a damaged holder. Check dimensions and mounting patterns before you start a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Der Text dieser Sammlung ist auf Englisch verfasst; die Suche selbst funktioniert in jeder Sprache.

Eine Sammlung von Polyzon · 47 Modelle von 3 Plattformen

So entsteht diese Sammlung

Polyzon stellt diese Sammlung aus den Suchergebnissen der angebundenen Plattformen zusammen. Dubletten und Modelle ohne Vorschaubild werden entfernt, schwache Treffer rutschen ans Ende, der Rest bleibt in der Reihenfolge der Suche. Die Modelle gehören ihren Urhebern – die Bedingungen findest du auf der Seite des jeweiligen Modells.

Auswahlregeln: Polyzon-Redaktion · Text aktualisiert: 14.10.2026

Sammlung ansehen Alle anzeigen: 11440 Modelle →
Sammlung

Für den Einstieg

Alle Modelle dieser Sammlung

Alle anzeigen: 11440 Modelle
Über die Kategorie

«Pixhawk Mount STL Files for 3D Printing»

Mounts for Pixhawk boards range from simple flat plates to damped stacks, GPS masts and full enclosures. Some designs hold only the flight controller, while others combine a GPS holder, power module tray or frame adapter. The differences matter because a low-profile plate saves vertical space, whereas a damped mount adds height and isolation.

On the author's model page, check the hole spacing, board dimensions and screw sizes before printing. Look at whether the design needs supports, how many parts it includes, and which material and settings the author lists. Photos of real prints can show clearances, wall thickness and how cables are routed.

To narrow the results, try related terms such as flight controller mount, anti-vibration mount, GPS mast, autopilot case or frame bracket. Adding a frame type or board family can help, but verify the dimensions rather than relying on a name. You can also search for mounting accessories like standoffs, vibration dampers and antenna holders.

FAQ

Häufige Fragen

What should I measure before printing a Pixhawk mount?
Measure the board footprint, mounting hole spacing, screw diameter and the space available on the frame. Also note cable clearance and the height added by dampers.
Do Pixhawk mounts need supports?
It depends on the geometry; overhangs, screw bosses and recessed holes often need them. The author's page usually states whether supports are required and where to place them.
Can a GPS mount be printed separately?
Yes, many designs treat the GPS holder as a separate part or a mast that attaches to the frame. Check the base pattern and whether the mast height fits under the canopy.
How do I find a mount for a specific frame?
Search by frame type, mounting pattern or board family, then compare the hole spacing in the model description. Related terms like autopilot tray or flight controller bracket can surface more options.
Ähnliches
Wohnen & Haushalt

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108 Modelle
Elektronik

Router Mounts: 3D Models for Wall and Desk

524262 Modelle
Werkzeuge & Geräte

FPV Mount 3D Models: Camera, Antenna, GPS

525876 Modelle
Elektronik

Pixhawk 4 Mount 3D Models and STL Files

1571 Modelle
Objekte

Mark4 Drone Mount 3D Models and STL Files

664776 Modelle
Militär

Mark 5 Mount STL Files for 3D Printing

665313 Modelle

Alle Kategorien für 3D-⁠Modelle

Der komplette Themenkatalog – von Wohnen & Haushalt bis CNC, mit Suche auf allen angebundenen Plattformen.

Zum Kategorienkatalog