Electrónica

Pixhawk Mount STL Files for 3D Printing

This collection covers STL files for Pixhawk mounts, including anti-vibration plates, GPS holders, cases and frame brackets. It is useful when you need to adapt an autopilot to an existing airframe or replace a damaged holder. Check dimensions and mounting patterns before you start a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 47 modelos de 3 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 14/10/2026

Ver la colección Mostrar todos: 11440 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 11440 modelos
Sobre la categoría

«Pixhawk Mount STL Files for 3D Printing»

Mounts for Pixhawk boards range from simple flat plates to damped stacks, GPS masts and full enclosures. Some designs hold only the flight controller, while others combine a GPS holder, power module tray or frame adapter. The differences matter because a low-profile plate saves vertical space, whereas a damped mount adds height and isolation.

On the author's model page, check the hole spacing, board dimensions and screw sizes before printing. Look at whether the design needs supports, how many parts it includes, and which material and settings the author lists. Photos of real prints can show clearances, wall thickness and how cables are routed.

To narrow the results, try related terms such as flight controller mount, anti-vibration mount, GPS mast, autopilot case or frame bracket. Adding a frame type or board family can help, but verify the dimensions rather than relying on a name. You can also search for mounting accessories like standoffs, vibration dampers and antenna holders.

FAQ

Preguntas frecuentes

What should I measure before printing a Pixhawk mount?
Measure the board footprint, mounting hole spacing, screw diameter and the space available on the frame. Also note cable clearance and the height added by dampers.
Do Pixhawk mounts need supports?
It depends on the geometry; overhangs, screw bosses and recessed holes often need them. The author's page usually states whether supports are required and where to place them.
Can a GPS mount be printed separately?
Yes, many designs treat the GPS holder as a separate part or a mast that attaches to the frame. Check the base pattern and whether the mast height fits under the canopy.
How do I find a mount for a specific frame?
Search by frame type, mounting pattern or board family, then compare the hole spacing in the model description. Related terms like autopilot tray or flight controller bracket can surface more options.
Relacionado
Hogar

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108 modelos
Electrónica

Router Mounts: 3D Models for Wall and Desk

524262 modelos
Herramientas y equipos

FPV Mount 3D Models: Camera, Antenna, GPS

525876 modelos
Electrónica

Pixhawk 4 Mount 3D Models and STL Files

1571 modelos
Objetos

Mark4 Drone Mount 3D Models and STL Files

664776 modelos
Temática militar

Mark 5 Mount STL Files for 3D Printing

665313 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías