Elektronik

Pixhawk Mount STL Files for 3D Printing

This collection covers STL files for Pixhawk mounts, including anti-vibration plates, GPS holders, cases and frame brackets. It is useful when you need to adapt an autopilot to an existing airframe or replace a damaged holder. Check dimensions and mounting patterns before you start a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 11440 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 11440 model
Kategori hakkında

«Pixhawk Mount STL Files for 3D Printing»

Mounts for Pixhawk boards range from simple flat plates to damped stacks, GPS masts and full enclosures. Some designs hold only the flight controller, while others combine a GPS holder, power module tray or frame adapter. The differences matter because a low-profile plate saves vertical space, whereas a damped mount adds height and isolation.

On the author's model page, check the hole spacing, board dimensions and screw sizes before printing. Look at whether the design needs supports, how many parts it includes, and which material and settings the author lists. Photos of real prints can show clearances, wall thickness and how cables are routed.

To narrow the results, try related terms such as flight controller mount, anti-vibration mount, GPS mast, autopilot case or frame bracket. Adding a frame type or board family can help, but verify the dimensions rather than relying on a name. You can also search for mounting accessories like standoffs, vibration dampers and antenna holders.

FAQ

Sıkça sorulan sorular

What should I measure before printing a Pixhawk mount?
Measure the board footprint, mounting hole spacing, screw diameter and the space available on the frame. Also note cable clearance and the height added by dampers.
Do Pixhawk mounts need supports?
It depends on the geometry; overhangs, screw bosses and recessed holes often need them. The author's page usually states whether supports are required and where to place them.
Can a GPS mount be printed separately?
Yes, many designs treat the GPS holder as a separate part or a mast that attaches to the frame. Check the base pattern and whether the mast height fits under the canopy.
How do I find a mount for a specific frame?
Search by frame type, mounting pattern or board family, then compare the hole spacing in the model description. Related terms like autopilot tray or flight controller bracket can surface more options.
İlgili
Ev ve yaşam

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108 model
Elektronik

Router Mounts: 3D Models for Wall and Desk

524262 model
Alet ve ekipman

FPV Mount 3D Models: Camera, Antenna, GPS

525876 model
Elektronik

Pixhawk 4 Mount 3D Models and STL Files

1571 model
Nesneler

Mark4 Drone Mount 3D Models and STL Files

664776 model
Askeri

Mark 5 Mount STL Files for 3D Printing

665313 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç