Electronics

3D Models for Potentiometer Regulators and Knobs

This collection gathers 3D models built around potentiometers and the regulators they control: knobs, dials, housings and controller cases. Most of these files are small parts that are awkward to buy separately, which makes them a practical target for 3D printing. The mix ranges from simple replacement dials to full enclosures for step-down boards and fan controllers. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

A Polyzon collection · 48 models from 8 platforms

How this collection is put together

Polyzon assembles this collection from search results on the connected platforms. Repeats and models without a preview are removed, weak matches go to the end, and the rest keeps the search order. Models belong to their authors — check the terms on each model's page.

Selection rules: the Polyzon editorial team · Text updated 2026-10-11

View the collection Show all: 12651 models →
Collection

Start here

All models in this collection

Show all: 12651 models
About the category

«3D Models for Potentiometer Regulators and Knobs»

The most common group is knobs and dials, made for potentiometers and rotary encoders of various shaft shapes, sometimes with a marker line or a textured grip. A second group covers enclosures and cases for voltage regulators, power modules and fan speed controllers, where the shell has to leave room for the board, the shaft and the wiring. A smaller set deals with repair parts for specific devices, such as a rod or a replacement piece that links a knob to the original control.

When choosing a model, open the author's page and read what is listed there: the shaft diameter and shape the knob is drawn around, the outer dimensions of the case, the number of separate parts and how they join, and whether the author used supports. Look at photos of real prints to judge wall thickness and how the openings for connectors and screws are placed. The material and settings the author mentions are a starting point, not a rule, since a knob and a housing have different demands on stiffness and heat resistance.

If the first results do not match what you need, try other wording: dial, knob, cap, shaft adapter, control panel, speed controller, voltage regulator, converter box, encoder. Related topics such as fan ducts, bench supply parts or monitor controls often lead to files that share the same mounting idea. Narrowing by shaft size, board type or device model usually helps more than adding adjectives.

FAQ

Frequently asked questions

What should I measure before printing a knob for a potentiometer?
Measure the shaft diameter and note whether it is round, knurled or split, then check the height of the shaft above the panel. The model page usually states the shaft size it was drawn for, so compare that with your part.
Do regulator enclosures need supports?
It depends on how the author oriented the model. Many cases are drawn to print flat with the openings facing up, while others need supports under overhangs or inside cutouts. The description or the photos usually show which approach was used.
Which material works for a part near a hot regulator board?
Small knobs are usually printed in the same material as the rest of a project, while housings that sit close to warm components are often made in a filament with higher heat resistance. Check what the author lists and what temperature your board reaches.
How do I find a controller case for a board I already own?
Search by the board name or its dimensions rather than by the word regulator alone, and also try converter, module or supply. If nothing matches exactly, look for a case with a similar footprint and check the cutouts.
Related
Electronics

Potentiometer Pedal 3D Models and STL Parts

2095 models
Electronics

Throttle Trigger and Potentiometer Knob STL Models

1595 models
Electronics

Rotary Camera Mechanisms: STL Models for 3D Printing

53689 models
Electronics

NEMA 34, CH341 and R34 3D Models to Print

9659 models
Electronics

3D-модели заглушек для разъемов Jginyue B550M ARGB

93710 models
Electronics

Low Profile PCI Slot Covers: 3D Models and STL Files

191191 models

All 3D model categories

The full catalog of topics — from home & household to CNC, searchable across the connected sources.

Open the category catalog