Hobbies y makers

3D models for FPV Mark 4 V2 frame accessories

This collection gathers STL files for large FPV Mark 4 V2 frames, from camera mounts to GPS and antenna holders. It is useful when you need to adapt a frame for a specific camera, receiver or gimbal. Check each model page for dimensions and assembly details before 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 47 modelos de 5 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 493909 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 493909 modelos
Sobre la categoría

«3D models for FPV Mark 4 V2 frame accessories»

The collection centers on add-on parts for large FPV frames rather than complete drones. Camera mounts appear in several shapes, while GPS, antenna and receiver holders tend to be smaller and more specific to a radio setup. Side plates, covers and arm holders address frame structure, and servo or gimbal holders add camera movement.

When choosing a model, open the author's page and check the listed dimensions, hole spacing, screw sizes and part count. Look at whether the design needs supports, what material and print settings the author notes, and whether photos of real prints are included. Assembly steps and hardware requirements matter as much as the outer shape.

To refine a search, try terms such as camera mount, GPS holder, antenna bracket, side plate or canopy for the frame family. Related searches include action-camera bracket, receiver mount, gimbal holder and arm brace. If a result is too specific, broaden to large FPV frame accessories and then filter by the part you need.

FAQ

Preguntas frecuentes

What parts are usually available for large FPV frames?
Common groups include camera mounts, GPS and antenna holders, side plates, covers, and gimbal or servo brackets. The exact mix depends on the frame family and the equipment you plan to carry.
How do I choose a camera mount for a large FPV frame?
Check the camera model, mounting pattern, hole spacing and the angle range shown on the model page. Also review the part count and whether the mount uses screws, zip ties or another fixing method.
What should I check before printing a GPS or antenna mount?
Look at the dimensions for the receiver or antenna, the screw holes and the wall thickness in the design. The author's notes on material and orientation can help you plan the print.
Can I use a mount designed for a smaller frame on a larger one?
Only if the mounting pattern and spacing match what you need; otherwise the part may not sit correctly. Compare the model dimensions with your frame before printing.
Relacionado
Hobbies y makers

FPV Mark 4 V2 9-Inch 3D Models and STL Parts

2441 modelos
Electrónica

Large FPV Drone Frame Parts: 3D Models and STL

2285 modelos
Electrónica

FPV Drone 3D Models: Frames, Mounts and TPU Parts

2061 modelos
Electrónica

STL Files for 8-Inch FPV Drone Frames and Mounts

2301 modelos
Electrónica

3D Models for 10-Inch FPV Frames and Mounts

2587 modelos
Electrónica

FPV Drone Frame and Mount STL Models for 3D Printing

2391 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías