爱好与创客

3D models for FPV Mark 4 V2 frame accessories

This collection gathers STL files for large FPV Mark 4 V2 frames, from camera mounts to GPS and antenna holders. It is useful when you need to adapt a frame for a specific camera, receiver or gimbal. Check each model page for dimensions and assembly details before 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 47个模型 来自5个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部493909个模型 →
合集

从这里开始

合集中的全部模型

查看全部493909个模型
关于此分类

«3D models for FPV Mark 4 V2 frame accessories»

The collection centers on add-on parts for large FPV frames rather than complete drones. Camera mounts appear in several shapes, while GPS, antenna and receiver holders tend to be smaller and more specific to a radio setup. Side plates, covers and arm holders address frame structure, and servo or gimbal holders add camera movement.

When choosing a model, open the author's page and check the listed dimensions, hole spacing, screw sizes and part count. Look at whether the design needs supports, what material and print settings the author notes, and whether photos of real prints are included. Assembly steps and hardware requirements matter as much as the outer shape.

To refine a search, try terms such as camera mount, GPS holder, antenna bracket, side plate or canopy for the frame family. Related searches include action-camera bracket, receiver mount, gimbal holder and arm brace. If a result is too specific, broaden to large FPV frame accessories and then filter by the part you need.

FAQ

常见问题

What parts are usually available for large FPV frames?
Common groups include camera mounts, GPS and antenna holders, side plates, covers, and gimbal or servo brackets. The exact mix depends on the frame family and the equipment you plan to carry.
How do I choose a camera mount for a large FPV frame?
Check the camera model, mounting pattern, hole spacing and the angle range shown on the model page. Also review the part count and whether the mount uses screws, zip ties or another fixing method.
What should I check before printing a GPS or antenna mount?
Look at the dimensions for the receiver or antenna, the screw holes and the wall thickness in the design. The author's notes on material and orientation can help you plan the print.
Can I use a mount designed for a smaller frame on a larger one?
Only if the mounting pattern and spacing match what you need; otherwise the part may not sit correctly. Compare the model dimensions with your frame before printing.
相关
爱好与创客

FPV Mark 4 V2 9-Inch 3D Models and STL Parts

2441个模型
电子产品

Large FPV Drone Frame Parts: 3D Models and STL

2285个模型
电子产品

FPV Drone 3D Models: Frames, Mounts and TPU Parts

2061个模型
电子产品

STL Files for 8-Inch FPV Drone Frames and Mounts

2301个模型
电子产品

3D Models for 10-Inch FPV Frames and Mounts

2587个模型
电子产品

FPV Drone Frame and Mount STL Models for 3D Printing

2391个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录