Hobi ve kendin yap

3D models for FPV Mark 4 V2 frame accessories

This collection gathers STL files for large FPV Mark 4 V2 frames, from camera mounts to GPS and antenna holders. It is useful when you need to adapt a frame for a specific camera, receiver or gimbal. Check each model page for dimensions and assembly details before 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 472034 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 472034 model
Kategori hakkında

«3D models for FPV Mark 4 V2 frame accessories»

The collection centers on add-on parts for large FPV frames rather than complete drones. Camera mounts appear in several shapes, while GPS, antenna and receiver holders tend to be smaller and more specific to a radio setup. Side plates, covers and arm holders address frame structure, and servo or gimbal holders add camera movement.

When choosing a model, open the author's page and check the listed dimensions, hole spacing, screw sizes and part count. Look at whether the design needs supports, what material and print settings the author notes, and whether photos of real prints are included. Assembly steps and hardware requirements matter as much as the outer shape.

To refine a search, try terms such as camera mount, GPS holder, antenna bracket, side plate or canopy for the frame family. Related searches include action-camera bracket, receiver mount, gimbal holder and arm brace. If a result is too specific, broaden to large FPV frame accessories and then filter by the part you need.

FAQ

Sıkça sorulan sorular

What parts are usually available for large FPV frames?
Common groups include camera mounts, GPS and antenna holders, side plates, covers, and gimbal or servo brackets. The exact mix depends on the frame family and the equipment you plan to carry.
How do I choose a camera mount for a large FPV frame?
Check the camera model, mounting pattern, hole spacing and the angle range shown on the model page. Also review the part count and whether the mount uses screws, zip ties or another fixing method.
What should I check before printing a GPS or antenna mount?
Look at the dimensions for the receiver or antenna, the screw holes and the wall thickness in the design. The author's notes on material and orientation can help you plan the print.
Can I use a mount designed for a smaller frame on a larger one?
Only if the mounting pattern and spacing match what you need; otherwise the part may not sit correctly. Compare the model dimensions with your frame before printing.
İlgili
Hobi ve kendin yap

FPV Mark 4 V2 9-Inch 3D Models and STL Parts

2441 model
Elektronik

Large FPV Drone Frame Parts: 3D Models and STL

2285 model
Elektronik

FPV Drone 3D Models: Frames, Mounts and TPU Parts

2061 model
Elektronik

STL Files for 8-Inch FPV Drone Frames and Mounts

2301 model
Elektronik

3D Models for 10-Inch FPV Frames and Mounts

2587 model
Elektronik

FPV Drone Frame and Mount STL Models for 3D Printing

2391 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç