Herramientas y equipos

G 2 Fitting 3D Models: Threaded Adapters and STL Parts

This collection gathers STL files for G 2 and related G-thread fittings, from hose adapters to pneumatic couplers. It helps you find parts for plumbing repairs, workshop dust collection, and 3D printer upgrades. Each model page gives the details you need to judge a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 46 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 15/10/2026

Ver la colección Mostrar todos: 12297 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 12297 modelos
Sobre la categoría

«G 2 Fitting 3D Models: Threaded Adapters and STL Parts»

The fittings in this collection fall into a few groups: hose and tube adapters with G threads, pneumatic push-to-connect fittings, plumbing unions and faucet parts, and workshop dust-collection ports. Some are simple one-piece adapters, while others combine a thread with a tee, cap, or clamp. Printer-specific parts such as Bowden tube caps and extruder covers appear alongside general plumbing hardware.

When choosing a model, check the thread size and pitch, the hose or tube diameter, and whether the part is meant to seal with a gasket, tape, or an O-ring. Look at the number of parts, how they assemble, and whether the author lists supports, material, and slicer settings. Photos of real prints can show how the threads and mating surfaces come out.

To refine your search, try synonyms and related terms such as G thread, BSP, hose adapter, pneumatic fitting, pipe union, and dust collection port. Adding a diameter or thread size narrows results, and combining a fitting type with a printer model or workshop tool can surface more relevant files. You can also browse broader categories like plumbing, printer parts, or workshop accessories.

FAQ

Preguntas frecuentes

What does G mean in a fitting size?
G denotes a British Standard Pipe parallel thread, often followed by a nominal size. The actual outer diameter differs from the nominal number, so measure the thread before printing.
How do I match a G thread to a hose size?
Look at both the thread callout and the hose or tube diameter. A G thread adapter often pairs a nominal thread with a barb or push-fit end for a specific hose size.
Which material should I check for a G 2 fitting?
The model page usually lists a suggested material and settings. For parts under pressure or heat, compare those notes with the demands of your setup.
Do these fittings need supports?
It depends on the orientation and overhangs in the model. The author may show a recommended orientation or note where supports are needed.
Relacionado
Herramientas y equipos

3D models for 1/2-Inch Fittings and Adapters

1091030 modelos
Herramientas y equipos

3D Models for 1-1/4 to 32 Fittings and Adapters

12230 modelos
Herramientas y equipos

Transom Intake Fitting 3D Models and STL Files

6031 modelos
Herramientas y equipos

3D Models for Herringbone Fittings and Adapters

7671 modelos
Herramientas y equipos

FPV Stand 3D Models: Launch Pads and Desk Stands

514289 modelos
Herramientas y equipos

Cam Lock Tool STL Files for 3D Printing

12786 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías