工具与设备

G 2 Fitting 3D Models: Threaded Adapters and STL Parts

This collection gathers STL files for G 2 and related G-thread fittings, from hose adapters to pneumatic couplers. It helps you find parts for plumbing repairs, workshop dust collection, and 3D printer upgrades. Each model page gives the details you need to judge a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 46个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月15日

查看合集 查看全部12297个模型 →
合集

从这里开始

合集中的全部模型

查看全部12297个模型
关于此分类

«G 2 Fitting 3D Models: Threaded Adapters and STL Parts»

The fittings in this collection fall into a few groups: hose and tube adapters with G threads, pneumatic push-to-connect fittings, plumbing unions and faucet parts, and workshop dust-collection ports. Some are simple one-piece adapters, while others combine a thread with a tee, cap, or clamp. Printer-specific parts such as Bowden tube caps and extruder covers appear alongside general plumbing hardware.

When choosing a model, check the thread size and pitch, the hose or tube diameter, and whether the part is meant to seal with a gasket, tape, or an O-ring. Look at the number of parts, how they assemble, and whether the author lists supports, material, and slicer settings. Photos of real prints can show how the threads and mating surfaces come out.

To refine your search, try synonyms and related terms such as G thread, BSP, hose adapter, pneumatic fitting, pipe union, and dust collection port. Adding a diameter or thread size narrows results, and combining a fitting type with a printer model or workshop tool can surface more relevant files. You can also browse broader categories like plumbing, printer parts, or workshop accessories.

FAQ

常见问题

What does G mean in a fitting size?
G denotes a British Standard Pipe parallel thread, often followed by a nominal size. The actual outer diameter differs from the nominal number, so measure the thread before printing.
How do I match a G thread to a hose size?
Look at both the thread callout and the hose or tube diameter. A G thread adapter often pairs a nominal thread with a barb or push-fit end for a specific hose size.
Which material should I check for a G 2 fitting?
The model page usually lists a suggested material and settings. For parts under pressure or heat, compare those notes with the demands of your setup.
Do these fittings need supports?
It depends on the orientation and overhangs in the model. The author may show a recommended orientation or note where supports are needed.
相关
工具与设备

3D models for 1/2-Inch Fittings and Adapters

1091030个模型
工具与设备

3D Models for 1-1/4 to 32 Fittings and Adapters

12230个模型
工具与设备

Transom Intake Fitting 3D Models and STL Files

6031个模型
工具与设备

3D Models for Herringbone Fittings and Adapters

7671个模型
工具与设备

FPV Stand 3D Models: Launch Pads and Desk Stands

514289个模型
工具与设备

Cam Lock Tool STL Files for 3D Printing

12786个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录