Utensili e attrezzature

G 2 Fitting 3D Models: Threaded Adapters and STL Parts

This collection gathers STL files for G 2 and related G-thread fittings, from hose adapters to pneumatic couplers. It helps you find parts for plumbing repairs, workshop dust collection, and 3D printer upgrades. Each model page gives the details you need to judge a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 46 modelli da 4 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 15/10/2026

Vedi la raccolta Mostra tutti: 12297 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 12297 modelli
Informazioni sulla categoria

«G 2 Fitting 3D Models: Threaded Adapters and STL Parts»

The fittings in this collection fall into a few groups: hose and tube adapters with G threads, pneumatic push-to-connect fittings, plumbing unions and faucet parts, and workshop dust-collection ports. Some are simple one-piece adapters, while others combine a thread with a tee, cap, or clamp. Printer-specific parts such as Bowden tube caps and extruder covers appear alongside general plumbing hardware.

When choosing a model, check the thread size and pitch, the hose or tube diameter, and whether the part is meant to seal with a gasket, tape, or an O-ring. Look at the number of parts, how they assemble, and whether the author lists supports, material, and slicer settings. Photos of real prints can show how the threads and mating surfaces come out.

To refine your search, try synonyms and related terms such as G thread, BSP, hose adapter, pneumatic fitting, pipe union, and dust collection port. Adding a diameter or thread size narrows results, and combining a fitting type with a printer model or workshop tool can surface more relevant files. You can also browse broader categories like plumbing, printer parts, or workshop accessories.

FAQ

Domande frequenti

What does G mean in a fitting size?
G denotes a British Standard Pipe parallel thread, often followed by a nominal size. The actual outer diameter differs from the nominal number, so measure the thread before printing.
How do I match a G thread to a hose size?
Look at both the thread callout and the hose or tube diameter. A G thread adapter often pairs a nominal thread with a barb or push-fit end for a specific hose size.
Which material should I check for a G 2 fitting?
The model page usually lists a suggested material and settings. For parts under pressure or heat, compare those notes with the demands of your setup.
Do these fittings need supports?
It depends on the orientation and overhangs in the model. The author may show a recommended orientation or note where supports are needed.
Correlati
Utensili e attrezzature

3D models for 1/2-Inch Fittings and Adapters

1091030 modelli
Utensili e attrezzature

3D Models for 1-1/4 to 32 Fittings and Adapters

12230 modelli
Utensili e attrezzature

Transom Intake Fitting 3D Models and STL Files

6031 modelli
Utensili e attrezzature

3D Models for Herringbone Fittings and Adapters

7671 modelli
Utensili e attrezzature

FPV Stand 3D Models: Launch Pads and Desk Stands

514289 modelli
Utensili e attrezzature

Cam Lock Tool STL Files for 3D Printing

12786 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie