Jardín y huerto

Self-Watering Planter STL Models for 3D Printing

This collection gathers 3D models of plant pots that water themselves, from simple reservoir planters to builds with pumps and sensors. It is useful if you want to print a pot around a specific plant size or a specific watering method. Every model here is meant for a 3D printer, so the shape of the water chamber and the wall thickness matter as much as the look. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 5 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 104727 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 104727 modelos
Sobre la categoría

«Self-Watering Planter STL Models for 3D Printing»

The models fall into a few groups. Some are single-shell pots with a hidden reservoir and a wick or capillary channel that pulls water upward. Others are electronic: a printed housing holds a small pump, a controller board and a moisture sensor, and the pot is one part of a larger watering system. A third group is decorative, where the watering function sits inside a styled outer shell, and a fourth covers separate pieces such as lids, chambers and refill devices that attach to a pot you already have.

When choosing, read the author's page before printing. Check the outer diameter and height against the plant and the space you have, count the parts and see how they join, and look at whether the model needs supports and where they sit. For anything that touches water, note the material the author lists and the settings used, since wall thickness and layer adhesion affect how the chamber holds up. Photos of real prints are the quickest way to judge fit, thread tolerances and how visible the seams are.

Search terms can be widened if the first results are thin. Try self-watering planter, sub-irrigated pot, wick planter, automatic irrigation, moisture retention pot or lazy pot, and add a size or a plant type to narrow things down. For electronic versions, combine the pot with terms like Arduino, pump housing, sensor mount or water level indicator. Related directions include hydroponic pots, drip trays, soil moisture meters and printed parts for a larger irrigation setup.

FAQ

Preguntas frecuentes

How does a printed self-watering pot work?
Most designs keep a water reservoir below or around the soil and move water up through a wick, a capillary gap or a small pump. Electronic versions add a sensor that switches the pump on and off.
Which material should be used for parts in contact with water?
The author's model page usually states the material and settings that were used. Many makers prefer a filament that tolerates prolonged moisture for the reservoir and inner parts, while the outer shell can be printed in whatever matches the room.
Do these models need supports?
It depends on the geometry. Overhangs inside a water chamber, threaded joints and tall shells often do, and the author's notes or print photos usually show where supports were placed and how they were removed.
Can a pot model be scaled up or down?
Scaling changes wall thickness, thread fit and the clearance between the inner and outer parts, so a scaled version may no longer assemble as intended. Check the tolerances the author lists before changing the size.
Relacionado
Jardín y huerto

Self-Watering Planter and Vase 3D Models

4014 modelos
Jardín y huerto

Small cachepot 3D models and STL plant pots

449231 modelos
Jardín y huerto

Planter, Pot and Vase 3D Models

96827 modelos
Jardín y huerto

Self-Watering Seed Starter STL Models

6938 modelos
Jardín y huerto

Колышки для автополива: 3D-модели и STL файлы

2045 modelos
Jardín y huerto

Self-Watering Pot and Vase 3D Models for STL Printing

2891 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías