Búsqueda general

Drone Legs STL Models: Landing Gear and Risers

This collection gathers 3D models that lift a drone off the ground: risers and extenders for camera drones, fixed-length legs for FPV builds, replacement legs for damaged frames, and universal feet for tubes. Most of these parts are small and print in a single run, which makes them a common first project for anyone getting into 3D printing. The list is useful when an original leg has broken or when a frame needs more ground clearance. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 47 modelos de 7 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 12/10/2026

Ver la colección Mostrar todos: 43467 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 43467 modelos
Sobre la categoría

«Drone Legs STL Models: Landing Gear and Risers»

The models fall into a few groups. Risers and extenders raise the body of a camera drone without changing the frame, while FPV legs are usually simple rods or plates offered in several lengths. Repair parts copy the shape of a leg that cracks in a crash, and universal feet or tube mounts fit a range of struts rather than one airframe. Larger multirotors often use folding legs driven by a servo, which adds a hinge and a mount to the part count.

Before printing, read the model page for the numbers that decide whether a leg fits: tube diameter, hole spacing, screw size, leg length and the ground clearance it adds. Check how many parts the set contains and whether they are joined with screws, pins or glue. The author usually lists a material and settings; landing legs take repeated knocks, so many makers choose a filament that bends rather than shatters, and some use a softer one for the foot. Photos of real prints show how the part sits on the frame better than a render does.

Search results widen if you use the terms the authors use: landing gear, risers, extenders, skids, struts, feet and mounts, often combined with a frame size or a tube diameter. Related topics include camera and antenna mounts, motor mounts and servo brackets, since these parts share the same tube and hole conventions. If a search returns little, try the frame size alone or the leg length in millimetres, then narrow the list by part type.

FAQ

Preguntas frecuentes

Which measurements should I check before printing a drone leg?
Look at the tube diameter or mounting hole spacing, the screw size, the leg length and the ground clearance the part adds. The model page usually states these, and a mismatch means the leg will not sit on the frame.
What material do people use for printed landing legs?
Authors list their own material and settings, and those are the values to follow first. Parts that take impacts are often printed in a filament that flexes instead of cracking, while stiffer filament suits risers that only carry the body.
Do printed legs need supports?
It depends on the shape: flat plates and simple rods usually print without them, while angled or hollow parts may need them. The model page or the print profile notes whether supports are required and where they go.
How do I find a leg for a frame that is not in the results?
Try the terms landing gear, risers, extenders, skids or feet together with the frame size or tube diameter. Searching by leg length in millimetres or by the mount type also brings up parts listed under different names.
Relacionado
Electrónica

Drone Legs and Mounts: 3D Models and STL Files

12414 modelos
Hobbies y makers

FPV Drone Legs and Mounts: 3D Printing STL Files

239253 modelos
Hogar

3D models of legs: stands, figures, armor STL

99865 modelos
Búsqueda general

3D Models for FPV Drone Legs and Mounts

12384 modelos
Gadgets

3D printing models of drones and quadcopters

42172 modelos
Electrónica

3D Models for Geoscan Pioneer Drone Legs and Landing Gear

39739 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías