Piezas para impresoras

3D Models for Feet and Mounting Brackets

This collection gathers 3D models for feet, risers and mounting brackets: anti-vibration pads for printers, locating feet for laser engravers, adjustable supports and small device mounts. It helps when a machine wobbles, sits too low or needs a stable base, and you would rather print the part than order one. Each listing leads to an STL file you can inspect before slicing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 15/10/2026

Ver la colección Mostrar todos: 13287 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 13287 modelos
Sobre la categoría

«3D Models for Feet and Mounting Brackets»

The models fall into a few groups. Printer feet are usually printed in a soft filament and shaped as pads or plugs that sit under the frame. Laser engraver feet and locating mounts position a frame or a rail on a work surface. Adjustable risers and support feet use a threaded or telescoping section so height can be set, while device mounts, bumpers and brackets adapt a specific housing or motor.

When choosing, look at the load the author states and the surface the foot rests on, since a tall riser behaves differently from a flat pad. Check the number of parts, whether a screw, insert or adhesive is needed, and how the foot attaches to the frame or housing. On the model page, read the recommended material and settings, and look at photos of real prints to judge wall thickness and how the thread or snap fit turned out.

To narrow the results, try the words used for the same idea: damping feet, anti-vibration pads, risers, leveling feet, bumpers, spacers, brackets, base plates. Adding the machine type or the part it holds, such as a rail, motor or board, usually cuts the list quickly. Related searches include furniture feet, equipment feet and adjustable supports, which often use the same geometry.

FAQ

Preguntas frecuentes

What filament works for anti-vibration feet?
Soft filaments such as TPU are common because they absorb vibration, while rigid filaments suit feet that carry load or hold a thread. The author's page usually states which material the part was designed around.
How do I know whether a foot will fit my machine?
Compare the mounting hole spacing, the frame thickness and the footprint in the model description with your own measurements. If the model is parametric, check which dimensions can be edited before slicing.
Do these parts need supports?
It depends on the shape: flat pads often print without them, while overhangs on brackets and threaded sections may need them. The print orientation and support settings are usually listed with the model.
Can adjustable feet be printed on a resin printer?
Threaded and load-bearing parts are usually printed in FDM because resin is brittle under compression. Resin can work for small decorative caps or covers that carry little weight.
Relacionado
Electrónica

Drone Legs and Mounts: 3D Models and STL Files

12414 modelos
Hogar

Table Leg Fixing 3D Models and STL Parts

425132 modelos
Hogar

3D models of legs: stands, figures, armor STL

99865 modelos
Hobbies y makers

FPV Drone Legs and Mounts: 3D Printing STL Files

239253 modelos
Herramientas y equipos

3D Models of Fastenings and Mounts for 3D Printing

728982 modelos
Herramientas y equipos

5.8 GHz Antenna and Device Mounts: STL Files to Print

8265 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías