プリンターパーツ

3D Models for Feet and Mounting Brackets

This collection gathers 3D models for feet, risers and mounting brackets: anti-vibration pads for printers, locating feet for laser engravers, adjustable supports and small device mounts. It helps when a machine wobbles, sits too low or needs a stable base, and you would rather print the part than order one. Each listing leads to an STL file you can inspect before slicing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月15日

コレクションを見る モデル13287件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル13287件をすべて表示
カテゴリについて

«3D Models for Feet and Mounting Brackets»

The models fall into a few groups. Printer feet are usually printed in a soft filament and shaped as pads or plugs that sit under the frame. Laser engraver feet and locating mounts position a frame or a rail on a work surface. Adjustable risers and support feet use a threaded or telescoping section so height can be set, while device mounts, bumpers and brackets adapt a specific housing or motor.

When choosing, look at the load the author states and the surface the foot rests on, since a tall riser behaves differently from a flat pad. Check the number of parts, whether a screw, insert or adhesive is needed, and how the foot attaches to the frame or housing. On the model page, read the recommended material and settings, and look at photos of real prints to judge wall thickness and how the thread or snap fit turned out.

To narrow the results, try the words used for the same idea: damping feet, anti-vibration pads, risers, leveling feet, bumpers, spacers, brackets, base plates. Adding the machine type or the part it holds, such as a rail, motor or board, usually cuts the list quickly. Related searches include furniture feet, equipment feet and adjustable supports, which often use the same geometry.

FAQ

よくある質問

What filament works for anti-vibration feet?
Soft filaments such as TPU are common because they absorb vibration, while rigid filaments suit feet that carry load or hold a thread. The author's page usually states which material the part was designed around.
How do I know whether a foot will fit my machine?
Compare the mounting hole spacing, the frame thickness and the footprint in the model description with your own measurements. If the model is parametric, check which dimensions can be edited before slicing.
Do these parts need supports?
It depends on the shape: flat pads often print without them, while overhangs on brackets and threaded sections may need them. The print orientation and support settings are usually listed with the model.
Can adjustable feet be printed on a resin printer?
Threaded and load-bearing parts are usually printed in FDM because resin is brittle under compression. Resin can work for small decorative caps or covers that carry little weight.
関連
電子工作

Drone Legs and Mounts: 3D Models and STL Files

モデル12414件
暮らし・日用品

Table Leg Fixing 3D Models and STL Parts

モデル425132件
暮らし・日用品

3D models of legs: stands, figures, armor STL

モデル99865件
ホビー・ものづくり

FPV Drone Legs and Mounts: 3D Printing STL Files

モデル239253件
工具・機材

3D Models of Fastenings and Mounts for 3D Printing

モデル728982件
工具・機材

5.8 GHz Antenna and Device Mounts: STL Files to Print

モデル8265件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く