Peças para impressoras

3D Models for Feet and Mounting Brackets

This collection gathers 3D models for feet, risers and mounting brackets: anti-vibration pads for printers, locating feet for laser engravers, adjustable supports and small device mounts. It helps when a machine wobbles, sits too low or needs a stable base, and you would rather print the part than order one. Each listing leads to an STL file you can inspect before slicing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 13287 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 13287 modelos
Sobre a categoria

«3D Models for Feet and Mounting Brackets»

The models fall into a few groups. Printer feet are usually printed in a soft filament and shaped as pads or plugs that sit under the frame. Laser engraver feet and locating mounts position a frame or a rail on a work surface. Adjustable risers and support feet use a threaded or telescoping section so height can be set, while device mounts, bumpers and brackets adapt a specific housing or motor.

When choosing, look at the load the author states and the surface the foot rests on, since a tall riser behaves differently from a flat pad. Check the number of parts, whether a screw, insert or adhesive is needed, and how the foot attaches to the frame or housing. On the model page, read the recommended material and settings, and look at photos of real prints to judge wall thickness and how the thread or snap fit turned out.

To narrow the results, try the words used for the same idea: damping feet, anti-vibration pads, risers, leveling feet, bumpers, spacers, brackets, base plates. Adding the machine type or the part it holds, such as a rail, motor or board, usually cuts the list quickly. Related searches include furniture feet, equipment feet and adjustable supports, which often use the same geometry.

FAQ

Perguntas frequentes

What filament works for anti-vibration feet?
Soft filaments such as TPU are common because they absorb vibration, while rigid filaments suit feet that carry load or hold a thread. The author's page usually states which material the part was designed around.
How do I know whether a foot will fit my machine?
Compare the mounting hole spacing, the frame thickness and the footprint in the model description with your own measurements. If the model is parametric, check which dimensions can be edited before slicing.
Do these parts need supports?
It depends on the shape: flat pads often print without them, while overhangs on brackets and threaded sections may need them. The print orientation and support settings are usually listed with the model.
Can adjustable feet be printed on a resin printer?
Threaded and load-bearing parts are usually printed in FDM because resin is brittle under compression. Resin can work for small decorative caps or covers that carry little weight.
Relacionados
Eletrônica

Drone Legs and Mounts: 3D Models and STL Files

12414 modelos
Casa e utilidades

Table Leg Fixing 3D Models and STL Parts

425132 modelos
Casa e utilidades

3D models of legs: stands, figures, armor STL

99865 modelos
Hobby e makers

FPV Drone Legs and Mounts: 3D Printing STL Files

239253 modelos
Ferramentas e equipamentos

3D Models of Fastenings and Mounts for 3D Printing

728982 modelos
Ferramentas e equipamentos

5.8 GHz Antenna and Device Mounts: STL Files to Print

8265 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias