Electrónica

0.96-Inch OLED 3D Models and STL Cases

This collection gathers 3D-printable parts built around the 0.96-inch OLED display module, from plain two-part boxes to housings that carry a microcontroller next to the screen. Most files are STL models for a desktop 3D printer, and they cover both the 128x64 I2C boards and the wider seven-pin versions. It is useful when a small display has to be mounted in a project rather than left loose on a breadboard. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 5 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 43751 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 43751 modelos
Sobre la categoría

«0.96-Inch OLED 3D Models and STL Cases»

Enclosures are the largest group: flat two-part boxes, snap-fit shells and modular cases that stack with other printed parts. A second group pairs the screen with a controller board such as an ESP32 or a NodeMCU, so the case needs openings for USB, buttons and wiring. There are also desk-side builds where the display shows a clock or system readouts, and mounting plates for handheld or tracker boards.

Before printing, compare the board dimensions the author lists, because 0.96-inch modules differ in PCB length, pin count and connector position. Check whether the design expects I2C or SPI wiring, how many parts have to be assembled, and whether the page shows photos of a finished print. The material and layer settings the author gives indicate how thin walls, clips and screw bosses are meant to be printed.

To narrow the results, search by the driver name SSD1306, by the resolution 128x64, or by the board you use, such as ESP32, NodeMCU or a seven-pin module. Related terms like OLED holder, display bezel, panel mount or project box bring up other approaches to the same problem. If your screen is a different size, the same queries work for 1.3-inch modules.

FAQ

Preguntas frecuentes

What does a 0.96-inch OLED module mean?
It is the diagonal size of a small monochrome display, usually 128x64 pixels and driven by an SSD1306 controller over I2C or SPI. The printed parts in this collection are shaped around that outline.
Are these cases made for every 0.96-inch module?
No. PCB length, pin count and connector position vary between versions, so compare the dimensions given on the model page with your own board before printing.
What should I check before printing a case?
Look at wall thickness, clip or screw features, openings for the connector and buttons, and the material and settings the author lists. Photos of a real print show how the parts go together.
Can the same models be used with a 1.3-inch display?
Not directly, since the outline is larger. Search for that size separately, as some designs are published for both formats.
Relacionado
Gadgets

Nintendo Switch OLED 3D Models and STL Files

67066 modelos
Vehículos

Nissan Caravan 3D models: vans, kit cards and keychains

1592 modelos
Electrónica

USB Cable Organizer STL Models for 3D Printing

216523 modelos
Electrónica

3D Printed Antennas: Yagi, Helix and Mount STL Files

26986 modelos
Electrónica

3D Printed Radio Frames for Car Dashboards

44606 modelos
Electrónica

3D Models for GPS and FPV 10-Inch Drone Mounts

7812 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías