電子工作

0.96-Inch OLED 3D Models and STL Cases

This collection gathers 3D-printable parts built around the 0.96-inch OLED display module, from plain two-part boxes to housings that carry a microcontroller next to the screen. Most files are STL models for a desktop 3D printer, and they cover both the 128x64 I2C boards and the wider seven-pin versions. It is useful when a small display has to be mounted in a project rather than left loose on a breadboard. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 5サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月11日

コレクションを見る モデル43751件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル43751件をすべて表示
カテゴリについて

«0.96-Inch OLED 3D Models and STL Cases»

Enclosures are the largest group: flat two-part boxes, snap-fit shells and modular cases that stack with other printed parts. A second group pairs the screen with a controller board such as an ESP32 or a NodeMCU, so the case needs openings for USB, buttons and wiring. There are also desk-side builds where the display shows a clock or system readouts, and mounting plates for handheld or tracker boards.

Before printing, compare the board dimensions the author lists, because 0.96-inch modules differ in PCB length, pin count and connector position. Check whether the design expects I2C or SPI wiring, how many parts have to be assembled, and whether the page shows photos of a finished print. The material and layer settings the author gives indicate how thin walls, clips and screw bosses are meant to be printed.

To narrow the results, search by the driver name SSD1306, by the resolution 128x64, or by the board you use, such as ESP32, NodeMCU or a seven-pin module. Related terms like OLED holder, display bezel, panel mount or project box bring up other approaches to the same problem. If your screen is a different size, the same queries work for 1.3-inch modules.

FAQ

よくある質問

What does a 0.96-inch OLED module mean?
It is the diagonal size of a small monochrome display, usually 128x64 pixels and driven by an SSD1306 controller over I2C or SPI. The printed parts in this collection are shaped around that outline.
Are these cases made for every 0.96-inch module?
No. PCB length, pin count and connector position vary between versions, so compare the dimensions given on the model page with your own board before printing.
What should I check before printing a case?
Look at wall thickness, clip or screw features, openings for the connector and buttons, and the material and settings the author lists. Photos of a real print show how the parts go together.
Can the same models be used with a 1.3-inch display?
Not directly, since the outline is larger. Search for that size separately, as some designs are published for both formats.
関連
ガジェット

Nintendo Switch OLED 3D Models and STL Files

モデル67066件
乗り物

Nissan Caravan 3D models: vans, kit cards and keychains

モデル1592件
電子工作

USB Cable Organizer STL Models for 3D Printing

モデル216523件
電子工作

3D Printed Antennas: Yagi, Helix and Mount STL Files

モデル26986件
電子工作

3D Printed Radio Frames for Car Dashboards

モデル44606件
電子工作

3D Models for GPS and FPV 10-Inch Drone Mounts

モデル7812件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く