Elektronik

0.96-Inch OLED 3D Models and STL Cases

This collection gathers 3D-printable parts built around the 0.96-inch OLED display module, from plain two-part boxes to housings that carry a microcontroller next to the screen. Most files are STL models for a desktop 3D printer, and they cover both the 128x64 I2C boards and the wider seven-pin versions. It is useful when a small display has to be mounted in a project rather than left loose on a breadboard. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 43751 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 43751 model
Kategori hakkında

«0.96-Inch OLED 3D Models and STL Cases»

Enclosures are the largest group: flat two-part boxes, snap-fit shells and modular cases that stack with other printed parts. A second group pairs the screen with a controller board such as an ESP32 or a NodeMCU, so the case needs openings for USB, buttons and wiring. There are also desk-side builds where the display shows a clock or system readouts, and mounting plates for handheld or tracker boards.

Before printing, compare the board dimensions the author lists, because 0.96-inch modules differ in PCB length, pin count and connector position. Check whether the design expects I2C or SPI wiring, how many parts have to be assembled, and whether the page shows photos of a finished print. The material and layer settings the author gives indicate how thin walls, clips and screw bosses are meant to be printed.

To narrow the results, search by the driver name SSD1306, by the resolution 128x64, or by the board you use, such as ESP32, NodeMCU or a seven-pin module. Related terms like OLED holder, display bezel, panel mount or project box bring up other approaches to the same problem. If your screen is a different size, the same queries work for 1.3-inch modules.

FAQ

Sıkça sorulan sorular

What does a 0.96-inch OLED module mean?
It is the diagonal size of a small monochrome display, usually 128x64 pixels and driven by an SSD1306 controller over I2C or SPI. The printed parts in this collection are shaped around that outline.
Are these cases made for every 0.96-inch module?
No. PCB length, pin count and connector position vary between versions, so compare the dimensions given on the model page with your own board before printing.
What should I check before printing a case?
Look at wall thickness, clip or screw features, openings for the connector and buttons, and the material and settings the author lists. Photos of a real print show how the parts go together.
Can the same models be used with a 1.3-inch display?
Not directly, since the outline is larger. Search for that size separately, as some designs are published for both formats.
İlgili
Pratik gereçler

Nintendo Switch OLED 3D Models and STL Files

67066 model
Taşıtlar

Nissan Caravan 3D models: vans, kit cards and keychains

1592 model
Elektronik

USB Cable Organizer STL Models for 3D Printing

216523 model
Elektronik

3D Printed Antennas: Yagi, Helix and Mount STL Files

26986 model
Elektronik

3D Printed Radio Frames for Car Dashboards

44606 model
Elektronik

3D Models for GPS and FPV 10-Inch Drone Mounts

7812 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç