Hogar

Vinyl Record Stands: 3D Models and STL Files

This collection gathers STL files for stands that hold vinyl records upright, on a wall, on a shelf or beside a turntable. It covers single-record display pieces as well as holders that keep a stack of albums in order. The models come from several platforms, so the page is a starting point for 3D printing rather than a single catalogue. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 12/10/2026

Ver la colección Mostrar todos: 2643 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 2643 modelos
Sobre la categoría

«Vinyl Record Stands: 3D Models and STL Files»

The designs split mainly by how many records they carry and where they sit. Wall brackets and shelf stands hold one album face-out, while storage holders take a stack and often use dividers or a slotted base. A separate group is built around shelving units, with feet or clips sized to a specific cube, and another around turntable areas, where the stand doubles as a place to rest the record that is currently playing.

Before printing, open the model page and read what the author lists: overall dimensions, the number of separate parts, how they join, and whether supports are needed. Check the thickness of the walls and the width of the slot against your own records, since sleeves vary. Material and settings matter here because a thin upright arm carries load, and photos of real prints show how the piece behaves with a full stack.

If the results feel narrow, try other wording: record holder, LP display, album stand, shelf bracket, wall mount, or turntable accessory. Adding a shelf name, a room, or a format such as 7-inch and 12-inch narrows the list further. Related topics worth browsing include turntable accessories, record cleaning, and general shelf storage.

FAQ

Preguntas frecuentes

What file formats do these vinyl stand models use?
Most listings provide STL files, and some include STEP or 3MF versions. Check the file list on the model page before downloading.
How much filament does a record stand take?
It depends on size and wall thickness; a small single-record stand uses far less than a multi-record holder. The author's page usually states dimensions and estimated material.
Can a printed stand hold a stack of records without bending?
That depends on the geometry, wall thickness and material. Look at the base and upright thickness on the model page and at photos of printed versions under load.
Do I need supports for these models?
Some designs print without them, others have overhangs at the bracket or the slot. The print settings section on the model page usually says whether supports are required.
Relacionado
Música

Vinyl Record Stands: 3D Models and STL Files

503780 modelos
Hogar

Disc Stands: 3D Models and STL Files

456176 modelos
Hogar

PS5 Disc Stand STL Models for Console and Controllers

578348 modelos
Objetos

Xbox Disc and Controller Stands: 3D Models to Print

3946 modelos
Gadgets

PlayStation Console and Disc Stand 3D Models

525352 modelos
Gadgets

PS4 Stand 3D Models: Controller and Console STL

5592 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías