Maison et quotidien

Vinyl Record Stands: 3D Models and STL Files

This collection gathers STL files for stands that hold vinyl records upright, on a wall, on a shelf or beside a turntable. It covers single-record display pieces as well as holders that keep a stack of albums in order. The models come from several platforms, so the page is a starting point for 3D printing rather than a single catalogue. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 12/10/2026

Voir la collection Tout afficher : 2643 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 2643 modèles
À propos de la catégorie

«Vinyl Record Stands: 3D Models and STL Files»

The designs split mainly by how many records they carry and where they sit. Wall brackets and shelf stands hold one album face-out, while storage holders take a stack and often use dividers or a slotted base. A separate group is built around shelving units, with feet or clips sized to a specific cube, and another around turntable areas, where the stand doubles as a place to rest the record that is currently playing.

Before printing, open the model page and read what the author lists: overall dimensions, the number of separate parts, how they join, and whether supports are needed. Check the thickness of the walls and the width of the slot against your own records, since sleeves vary. Material and settings matter here because a thin upright arm carries load, and photos of real prints show how the piece behaves with a full stack.

If the results feel narrow, try other wording: record holder, LP display, album stand, shelf bracket, wall mount, or turntable accessory. Adding a shelf name, a room, or a format such as 7-inch and 12-inch narrows the list further. Related topics worth browsing include turntable accessories, record cleaning, and general shelf storage.

FAQ

Questions fréquentes

What file formats do these vinyl stand models use?
Most listings provide STL files, and some include STEP or 3MF versions. Check the file list on the model page before downloading.
How much filament does a record stand take?
It depends on size and wall thickness; a small single-record stand uses far less than a multi-record holder. The author's page usually states dimensions and estimated material.
Can a printed stand hold a stack of records without bending?
That depends on the geometry, wall thickness and material. Look at the base and upright thickness on the model page and at photos of printed versions under load.
Do I need supports for these models?
Some designs print without them, others have overhangs at the bracket or the slot. The print settings section on the model page usually says whether supports are required.
Voir aussi
Musique

Vinyl Record Stands: 3D Models and STL Files

503780 modèles
Maison et quotidien

Disc Stands: 3D Models and STL Files

456176 modèles
Maison et quotidien

PS5 Disc Stand STL Models for Console and Controllers

578348 modèles
Objets

Xbox Disc and Controller Stands: 3D Models to Print

3946 modèles
Gadgets

PlayStation Console and Disc Stand 3D Models

525352 modèles
Gadgets

PS4 Stand 3D Models: Controller and Console STL

5592 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories