Casa e vita quotidiana

Vinyl Record Stands: 3D Models and STL Files

This collection gathers STL files for stands that hold vinyl records upright, on a wall, on a shelf or beside a turntable. It covers single-record display pieces as well as holders that keep a stack of albums in order. The models come from several platforms, so the page is a starting point for 3D printing rather than a single catalogue. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 48 modelli da 4 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 12/10/2026

Vedi la raccolta Mostra tutti: 2643 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 2643 modelli
Informazioni sulla categoria

«Vinyl Record Stands: 3D Models and STL Files»

The designs split mainly by how many records they carry and where they sit. Wall brackets and shelf stands hold one album face-out, while storage holders take a stack and often use dividers or a slotted base. A separate group is built around shelving units, with feet or clips sized to a specific cube, and another around turntable areas, where the stand doubles as a place to rest the record that is currently playing.

Before printing, open the model page and read what the author lists: overall dimensions, the number of separate parts, how they join, and whether supports are needed. Check the thickness of the walls and the width of the slot against your own records, since sleeves vary. Material and settings matter here because a thin upright arm carries load, and photos of real prints show how the piece behaves with a full stack.

If the results feel narrow, try other wording: record holder, LP display, album stand, shelf bracket, wall mount, or turntable accessory. Adding a shelf name, a room, or a format such as 7-inch and 12-inch narrows the list further. Related topics worth browsing include turntable accessories, record cleaning, and general shelf storage.

FAQ

Domande frequenti

What file formats do these vinyl stand models use?
Most listings provide STL files, and some include STEP or 3MF versions. Check the file list on the model page before downloading.
How much filament does a record stand take?
It depends on size and wall thickness; a small single-record stand uses far less than a multi-record holder. The author's page usually states dimensions and estimated material.
Can a printed stand hold a stack of records without bending?
That depends on the geometry, wall thickness and material. Look at the base and upright thickness on the model page and at photos of printed versions under load.
Do I need supports for these models?
Some designs print without them, others have overhangs at the bracket or the slot. The print settings section on the model page usually says whether supports are required.
Correlati
Musica

Vinyl Record Stands: 3D Models and STL Files

503780 modelli
Casa e vita quotidiana

Disc Stands: 3D Models and STL Files

456176 modelli
Casa e vita quotidiana

PS5 Disc Stand STL Models for Console and Controllers

578348 modelli
Oggetti

Xbox Disc and Controller Stands: 3D Models to Print

3946 modelli
Gadget

PlayStation Console and Disc Stand 3D Models

525352 modelli
Gadget

PS4 Stand 3D Models: Controller and Console STL

5592 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie