Électronique

3D Models for Anemometers and Wind Sensors

This collection gathers 3D models related to anemometers: complete wind gauges, replacement rotors and blades, housings for handheld meters, and parts of weather station assemblies. It is useful when a stock part has broken, when you are building a wind sensor from scratch, or when you want to adapt an existing meter for 3D printing. The listings come from several platforms, so the level of documentation varies from model to model. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 46 modèles sur 7 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 478 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 478 modèles
À propos de la catégorie

«3D Models for Anemometers and Wind Sensors»

The models fall into a few distinct groups. Complete anemometers range from simple spinning wind gauges to designs that combine a rotor with a sensor or a microcontroller. Replacement parts are usually just the impeller, the blades or a single bracket, meant to fit a specific meter body. Cases and holders are shaped around a handheld instrument, while weather station sets add a wind vane or a direction sensor next to the speed sensor.

Before printing, read the author's page for the dimensions that decide whether a part will fit: shaft or hub diameter, bearing seat, blade diameter and pitch, and the number of separate pieces. Check whether the design needs supports and how the parts are joined, and look at the material and settings the author lists, since outdoor use exposes a printed part to sun and moisture. Photos of real prints are more informative than renders alone.

If the results are thin, try other wordings: wind gauge, wind speed meter, cup anemometer, vane, impeller, rotor or paddle wheel. Related searches such as weather station enclosure, sensor mount, tripod adapter or micro:bit project often surface parts that a plain anemometer query misses. Combining the instrument name with the part you need, for example a blade or a case, narrows the list quickly.

FAQ

Questions fréquentes

What should I measure before printing a replacement impeller?
Note the shaft or hub diameter, the bore of the original part, the outer blade diameter and the bearing type. A few tenths of a millimeter can decide whether the rotor sits straight or wobbles.
Do printed anemometers need bearings?
Many designs include a seat for a small ball bearing or a bushing, while others rely on a printed axle. Check the author's parts list and the assembly notes before ordering anything.
Can a printed anemometer give accurate wind speed readings?
Accuracy depends on calibration and on the sensor the rotor is paired with. Look at how the author calibrates the design and what electronics are used, and treat uncalibrated builds as indicative rather than precise.
Which material works for a part that stays outdoors?
Check the material the author lists and consider how the part will be exposed to UV and moisture. A design that tolerates a slightly thicker blade or a reinforced hub is easier to adapt to a tougher filament.
Voir aussi
Outils et équipement

3D Printing Anemometer and Wind Sensor STL Models

2164 modèles
Gadgets

Anemometer 3D Models and STL Files

1277 modèles
Électronique

MSI Katana 3D Printing Models and STL Accessories

6111 modèles
Électronique

VTX VT-40 3D Models and STL Files for Printing

77142 modèles
Électronique

Sealed Cable Connector 3D Models and STL Files

10911 modèles
Électronique

3D Models of E-Bike Throttle Handles and STL Files

80879 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories