Eletrônica

3D Models for Anemometers and Wind Sensors

This collection gathers 3D models related to anemometers: complete wind gauges, replacement rotors and blades, housings for handheld meters, and parts of weather station assemblies. It is useful when a stock part has broken, when you are building a wind sensor from scratch, or when you want to adapt an existing meter for 3D printing. The listings come from several platforms, so the level of documentation varies from model to model. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 46 modelos de 7 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 478 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 478 modelos
Sobre a categoria

«3D Models for Anemometers and Wind Sensors»

The models fall into a few distinct groups. Complete anemometers range from simple spinning wind gauges to designs that combine a rotor with a sensor or a microcontroller. Replacement parts are usually just the impeller, the blades or a single bracket, meant to fit a specific meter body. Cases and holders are shaped around a handheld instrument, while weather station sets add a wind vane or a direction sensor next to the speed sensor.

Before printing, read the author's page for the dimensions that decide whether a part will fit: shaft or hub diameter, bearing seat, blade diameter and pitch, and the number of separate pieces. Check whether the design needs supports and how the parts are joined, and look at the material and settings the author lists, since outdoor use exposes a printed part to sun and moisture. Photos of real prints are more informative than renders alone.

If the results are thin, try other wordings: wind gauge, wind speed meter, cup anemometer, vane, impeller, rotor or paddle wheel. Related searches such as weather station enclosure, sensor mount, tripod adapter or micro:bit project often surface parts that a plain anemometer query misses. Combining the instrument name with the part you need, for example a blade or a case, narrows the list quickly.

FAQ

Perguntas frequentes

What should I measure before printing a replacement impeller?
Note the shaft or hub diameter, the bore of the original part, the outer blade diameter and the bearing type. A few tenths of a millimeter can decide whether the rotor sits straight or wobbles.
Do printed anemometers need bearings?
Many designs include a seat for a small ball bearing or a bushing, while others rely on a printed axle. Check the author's parts list and the assembly notes before ordering anything.
Can a printed anemometer give accurate wind speed readings?
Accuracy depends on calibration and on the sensor the rotor is paired with. Look at how the author calibrates the design and what electronics are used, and treat uncalibrated builds as indicative rather than precise.
Which material works for a part that stays outdoors?
Check the material the author lists and consider how the part will be exposed to UV and moisture. A design that tolerates a slightly thicker blade or a reinforced hub is easier to adapt to a tougher filament.
Relacionados
Ferramentas e equipamentos

3D Printing Anemometer and Wind Sensor STL Models

2164 modelos
Gadgets

Anemometer 3D Models and STL Files

1277 modelos
Eletrônica

MSI Katana 3D Printing Models and STL Accessories

6111 modelos
Eletrônica

VTX VT-40 3D Models and STL Files for Printing

77142 modelos
Eletrônica

Sealed Cable Connector 3D Models and STL Files

10911 modelos
Eletrônica

3D Models of E-Bike Throttle Handles and STL Files

80879 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias