Maison et quotidien

Door Closer 3D Models: Spring and Hydraulic STL Files

This collection gathers 3D models of door closers: spring and elastic-band mechanisms, hydraulic and overhead bodies, automatic and partial variants, plus handles and small hardware that go with them. Most entries are small mechanical assemblies, so they are useful for 3D printing practice and for repairing or adapting an existing door. Each listing shows how the parts fit together, which makes it easier to judge a design before you commit filament to it. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 52597 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 52597 modèles
À propos de la catégorie

«Door Closer 3D Models: Spring and Hydraulic STL Files»

The designs differ mainly in how they store and release force. Spring and rubber-band versions are compact, mount near the hinge and pull the leaf shut over a short arc. Hydraulic and overhead bodies are larger, sit above the door and close it more slowly, while partial closers and ajar holders only move or hold the leaf part of the way. Some models are adjustable, with a screw or a movable arm that changes the closing force.

Before printing, compare the model against your actual door. Check the hinge diameter and door thickness the author names, the arm length, and where the mounting holes fall. Look at how many separate parts there are and whether they need screws, pins or springs you have to source yourself. Read the material and settings the author lists, see whether supports are required, and study photos of real prints to judge tolerances around the pivot and the spring seat.

If the first results feel narrow, widen the wording. Try door damper, soft-close mechanism, self-closing hinge, gate closer or cabinet soft-close, and search by the part you need rather than the whole unit. Related topics such as hinges, latches, handles, counterweights and torsion springs often turn up designs that work for the same job.

FAQ

Questions fréquentes

What is the difference between a spring and a hydraulic door closer model?
Spring versions rely on a coiled spring or an elastic band and are usually small enough to sit at the hinge. Hydraulic versions imitate a fluid-damped body mounted overhead and are built from more parts, so they take longer to assemble.
What measurements should I take before printing a door closer?
Note the door thickness, the hinge pin diameter and the distance between mounting holes. Also measure the clearance above the door if the design is an overhead type, since the body needs room to swing.
Do these models need extra hardware?
Many do. Pins, screws, springs, elastic bands or small bearings are often listed by the author as separate items, so read the description and the parts list before starting a print.
Can a printed door closer be scaled up or down?
Scaling changes wall thickness and the fit of moving parts, so it usually needs adjustment of clearances rather than a single percentage change. Check the dimensions the author gives and test the pivot fit first.
Voir aussi
Maison et quotidien

Door Handle STL Models for 3D Printing

96505 modèles
Maison et quotidien

Door Hinge STL Models for 3D Printing

61840 modèles
Maison et quotidien

Door Roller STL Models for Sliding and Barn Doors

2949 modèles
Maison et quotidien

Door Stopper 3D Models: STL Files for 3D Printing

48414 modèles
Maison et quotidien

3D Models for Door Card Plugs and Trim Clips

7442 modèles
Objets

Door Hinge STL Models for 3D Printing

58185 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories